Project of a 6x8 house with a terrace. Projects of country houses with an attic and a veranda. Product reviews

Date of writing: 23.04.2022

Reading time: 22 minutes

The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm. Steps at the entrance.
The height of the ceiling of the first floor in cleanliness (from the floor log to the floor beam) - 2.29m (+/- 50mm)
The second floor is an attic. Clear attic ceiling height (from floor beam to ceiling beam) - 2.25 m
The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for buildings with an attic).
In the pediments of one-story buildings, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
Ventilation hatches are installed in the gables of buildings with an attic (3 pieces for each gable).
Eaves and roof overhangs 200 mm wide (for one-story buildings) and 300 mm (for buildings with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
The device of window and door openings with a dressing crown, without the installation of casing bars.
Loading, delivery up to 400 km from the city of Pestovo, Novgorod region, unloading a set of material.
Assembly of the house / bath at the customer's site.

The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
Waterproofing - roofing material in one layer.
Strapping - a bar of natural moisture with a section of 150x100 mm. On the outer perimeter, the strapping is laid in two rows. The bar is treated with a protective compound.
Floor logs - a board of natural moisture with a section of 40x150 mm per edge, with a step of 600 mm.
Draft floor - a board of natural humidity with a section of 22x100mm. Steam, waterproofing - NANOIZOL S.
Floor insulation - 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier - NANOIZOL V.
The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
External walls - profiled beam of natural humidity with a section of 145x90 mm (wall thickness - 90mm) Profile "block house" or straight. There are 17 crowns in total.
Partitions of the first floor - profiled beam of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
Mezhventsovy insulation - jute cloth 6 mm thick
Interconnection - on a metal dowel (building nail 6x200mm, 250mm).
Corner connection - "in half a tree." The outer corners of the log house are sewn up with clapboard (spruce / pine AB) 17 * 90 mm in two rows.
An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm filled with carved balusters. Steps at the entrance.
Terrace floors - dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments.
Terrace ceilings - lining (spruce / pine AB) 17 * 90 mm. Vapor barrier - NANOIZOL V.
Clear ceiling height of the first floor (floor to ceiling) – 2.25m (+/- 50mm)
The filing of the ceiling of the first floor - lining (spruce / pine AB) 12.8 * 88 mm. (joint for layout is allowed)
The second floor is an attic. Clear attic ceiling height (from floor to ceiling) - 2.20 m
The height of the roof in the ridge is 1.50 m (for one-story projects).
Floor insulation - 100 mm KNAUF / URSA mineral wool (or equivalent). Vapor barrier NANOIZOL V.
Attic floors - dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. . Each fifth board is fastened with screws (for the possibility of further flooring).
Sheathing of the walls and ceiling of the attic - lining (spruce / pine AB) 12.5 * 88 mm (a joint for layout is allowed).
Attic wall insulation - 100mm ROCKWOOL basalt mats (or equivalent). Vapor barrier - NANOIZOL V.
Partitions of the attic - a frame made of a bar 40x75, sheathed on both sides with clapboard (spruce / pine AB) 12.5 * 88 mm. Partitions are not insulated.
Rafters - farms from a board of natural humidity with a section of 150x40mm., 100x40mm. Are established with a step of 900-1000 mm.
The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for houses with an attic).
In the pediments of one-story houses, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
Ventilation hatches are installed in the gables of houses with an attic (3 pieces for each gable).
Lathing - a board of natural moisture with a section of 22 * 100 mm, with a step of 300 mm. Counter-lattice - rail 20 * 40 mm, along the slopes of the rafters.
Roofing - ONDULIN (burgundy, brown, green) or galvanized corrugated board. Underroofing vapor barrier - NANOIZOL S.
Installation of a drainage system from the roof (PVC, DEKE). Colors - brown (chocolate), burgundy (garnet), white (ice cream).
Cornices and roof overhangs 200 mm wide (for one-story houses) and 300 mm (for houses with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
The staircase to the attic is single-flight, on bowstrings made of planed timber with a section of 145 * 90 mm. Floorboard steps. The handrail and the fence in the attic are a planed bar with a section of 40 * 100 mm.
Windows - wooden, double-glazed, with a seal and fittings (screw hinges, twist locks). Inward-opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600mm; 600*600 mm. Windows are installed in casing boxes.
Doors - wooden, paneled, deaf (spruce / pine A). Size (h*w) 2000*800 mm; 2000*700 mm. Handles, hinges. A padlock is installed on the front door.
Casing bars (swarms) are installed in window and door openings.
Sealing of corners, joints, junctions - plinth spruce / pine A.
Finishing of windows, doors - platband spruce / pine A on both sides.
Nails for fixing parts - construction black.
Nails for fastening lining - galvanized 2.5x50 mm
Nails for fastening the plinth, layouts - finishing galvanized 1.8x50 mm.
Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
Assembly of the house on the site of the customer.

We have compiled for you a convenient table of differences in the configuration of houses for shrinkage and turnkey.

COSTRUCTION	SHRINK	FULL CONSTRUCTION
Columnar foundation of concrete blocks 200200400	Yes	Yes
Double strapping from a bar 150 * 100 mm	Yes	Yes
Floor logs from a board 40 * 150 on the edge with a step of 600 mm	Yes	Yes
Draft floor from a board 22*100/150 mm	No	Yes
Floor insulation with hydro and vapor barrier	No	Yes
Finished floor - dry tongue-and-groove floorboard 36 mm	No	Yes
Walls and partitions made of profiled timber of natural humidity with a section of 145 * 90 mm (wall thickness - 90mm)	Yes	Yes
assembling a log house on steel dowels	Yes	Yes
Corner connection - in half a tree	Yes	Yes
Mezhventsovy heater - jute	Yes	Yes
Rafters - trusses from a bar 40 * 100/150 mm with a pitch of 900/1000 mm	Yes	Yes
Lathing - board 20*100/150 mm	Yes	Yes
Roofing - ondulin / galvanized corrugated board C20	Yes	Yes
Roof eaves and overhangs are hemmed with clapboard spruce / pine AB	Yes	Yes
Installation of a drainage system from a PVC roof, DEKE	No	Yes
Window and door openings with dressing crown, without installation of casing bars	Yes	No
Window and door openings with installation of casing bars	No	Yes
Installation of windows and doors	No	Yes
Ceiling filing - lining spruce / pine AB	No	Yes
Insulation + vapor barrier of floors / attic	No	Yes
Finishing the walls and ceiling of the attic - lining spruce / pine AB	No	Yes
Staircase to the attic	No	Yes
Finishing: plinth, platbands	No	Yes
Loading a set of material, its delivery up to 400 km from our base, unloading at the customer's site	Yes	Yes

*Name*	*Cost, rub)*	*unit of measurement*
Foundation installation on screw piles or reinforced concrete foundation	8-921-930-69-80, 8-926-742-95-01
Decorative finish of the plinth - pickup ()
Installation of reinforced concrete slabs 500 * 500 * 100 mm under the supporting pedestals ()
Protection (lining board) of the first row of strapping from a larch board 50 * 150 mm ()
Protection (lining board) of the first row of strapping from a larch board 50 * 200 mm ()
Double strapping from timber 150x150mm
Double strapping from timber 150x200mm
Device floor log from a bar 150x100mm
Installation of floors from a larch terrace board "velveteen" (for open terraces) ()
The device of finishing floors from a tongue-and-groove larch floorboard 27 mm ()
External walls made of profiled timber with a moisture content of 145x140mm, partitions made of profiled timber. humidity section 145*90 mm		running meters external walls of the log house
External walls and partitions made of profiled chamber-drying timber with a section of 145x90 mm		running meters exterior walls and partition walls
External walls made of profiled kiln-dried timber with a section of 145x140 mm, partitions made of profiled kiln-dried timber with a section of 145x90 mm		linear meters of the outer walls of the log house
Exterior walls made of profiled timber. humidity with a section of 145x190mm, partitions made of profiled timber eat. humidity section 145*90 mm		linear meters of the outer walls of the log house
External walls made of profiled chamber-drying timber with a section of 145x190mm, partitions made of profiled chamber-drying timber with a section of 145*90mm.		linear meters of the outer walls of the log house
Kiln-dried lumber kit ()		m * 2 building area
Conjugation of crowns on a wooden dowel
Assembling a log house using a SPRING ASSEMBLY FORCE ()		running meters external walls and partition walls
Assembling a log house with a screed of crowns in height with steel studs	1500	running meters external walls and partition walls
Corner connection "groove-thorn" (warm corner)		one corner of the log
Corner connection “into a bowl” ()		house kit
Interventional insulation - holofiber ()		linear meter of the outer walls of the log house
Increasing the ceiling height by 14 cm (+ one crown in the log house)		running meters exterior walls and partition walls
Insulation 150mm		m * 2 insulated area
The device of a ladder on a bowstring made of glued laminated timber, with wide steps, turned pillars, balusters and a figured handrail.
Roofing - metal tiles		m*2 roof
Roofing - polymer-coated corrugated board (RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Installation of a drainage system (PVC, DEKE)		running meters roof slope
Corner snow barrier device ()		running meters roof slope
The device of tubular snow barriers ()		running meters roof slope
External finishing of pediments - block house spruce / pine AB 28 * 140		m * 2 gable area
External finishing of gables - imitation of timber 18*140 mm		m * 2 gable area
Attic device: sparse flooring from edged boards along the ceiling beams, a door in one of the gables + a dormer window in the opposite gable		m*2 ceiling
Treatment of the entire building with a fire-retardant compound NEOMID ()		m * 2 building area
Surface treatment with NEOMID terrace oil ()
Processing the walls and ceiling of the steam room and washing varnish NEOMID "for baths and saunas" ()		m * 2 walls and ceiling
Processing the ends of the log house with NEOMID TOR PLUS ()		opening/corner
Installation of a Russian-made insulated steel door ()
Installation of PVC windows with single-chamber double-glazed windows
Installation of PVC windows with double-glazed windows
Delivery over 400 km from Pestovo, Novgorod region.
Construction change house 2.0 * 3.0 / 4.0 m ()	from 21 000	PCS.

"Amber 6x8 with a veranda" - a project of a wooden frame house with a bathroom. The house has 3 bedrooms (two on the attic floor with a common loggia), a living room, a kitchen and a veranda at the entrance.

The log house project "Yantar 6x8 with a veranda, option 2" has a larger kitchen, and the bedrooms on the attic floor have become isolated, both have access to a common loggia.

Foundation

Pile screw foundation. Pile length 2500mm, diameter 89/108mm (according to the project), wall thickness 4mm. The pile is treated with a two-component anti-corrosion coating, with filling the pile cavity with M300 sand concrete. Plinth height 500mm, pile depth 2000mm. Binding of the foundation with an edged timber 200x150mm, treated with a fire-bioprotective composition by immersion.

It is possible to replace the pile-screw foundation with a reinforced concrete strip or a pile-grillage reinforced concrete foundation.

Walls of the 1st floor

The walls of the 1st are made using frame technology. Ceiling height 2600mm excluding floor boards and ceiling filing. The racks of the frame of the outer and load-bearing walls are made of edged boards chamber drying chamber drying timber imitation, interior decoration - lining. Wall insulation with 100mm slab insulation using wind-moisture protection membranes and vapor barrier.

Basement

The floor logs of the 1st floor are single, paired or triple, depending on the span, made of chamber-drying boards 50x150mm with a step of 640mm. A 100mm Ursa insulation is laid on the subfloor from a 22mm edged board using waterproofing and vapor barrier membranes. Floor covering - sheet pile board 36mm thick. The logs and the draft floor are treated with a fire-bioprotective composition by immersion.

Attic (walls of the 2nd floor)

The attic is made using frame technology. Ceiling height 2450mm excluding floor boards and ceiling filing. The racks of the frame of the outer and load-bearing walls are made of edged boards chamber drying 50x150mm, board partitions chamber drying 100x50mm. Exterior finish - timber imitation, interior decoration - lining. Insulation of the attic walls with 100 mm slab insulation using wind-moisture protection membranes and vapor barrier.

Additional insulation is possible.

Interfloor overlap

Logs of the floor of the interfloor overlap are single, paired or triple, depending on the span, are made of boards 50x150mm chamber drying with a step of 640mm, the ceiling of the 1st floor is lining. Floor covering - sheet pile board 36mm thick. Insulation 50mm "Ursa" is laid using vapor barrier membranes.

It is possible to replace it with logs with a section of 50x200mm and additional insulation.

Roof

Rafter system from edged boards chamber drying 50x150mm, step 640mm, lathing from a board 25x100mm. Roofing "Ondalux" color to choose from (red, brown, green). Insulation along the roof slope with 100 mm slab insulation, horizontally, along the tightening. "Ursa" 100mm. Hemming of the roof overhangs is made along the rafters with a planed board chamber drying 20x100mm.

It is possible to replace the roofing with metal and soft tiles, as well as additional insulation.

Spending the whole summer in nature is the dream of every city dweller and it is feasible if there is a country house with an attic and a veranda. allows you to significantly increase the footage suitable for living, and an extension to the building can expand the functionality of the home. The construction of such has reached the greatest popularity today, and their projects are presented on the Internet for every taste and taking into account the various financial possibilities of future summer residents.

The project of a country house 5x7 with a veranda and an attic

Projects of country houses with an attic and a veranda are offered for the construction of objects of various sizes. People with average incomes build dachas, starting from 6x6 m or 6x8, and ending. After that, they are supplemented with garages, baths, for a comfortable summer stay outside the city.

Each country developer believes that a dwelling with an attic is necessary not only to admire the glow of the night stars through the windows of the attic room, as many famous artists and poets did in search of inspiration. The attic is needed to increase the usable area of residential buildings, especially those with dimensions of 6x6 m. The owner of the housing is convinced that it should be used rationally, for the benefit of the whole family.

A variant of the project of a country cottage with an attic and a veranda

The attic superstructure is equipped during the construction of the house, or after it has already been built. The addition of a dwelling with an attic differs from the construction of an ordinary floor primarily in that its walls and ceilings are sloping, formed. This creates problems of their insulation and decoration, as well as the placement of window openings. However, by looking at finished projects, you can find a solution to problem situations and create attic spaces with a high level of comfort.

The proximity of the roof creates some inconvenience in using the attic. Under the sun, roofing can become very hot, and in heavy rain, it can make an annoying noise. This problem, by applying the appropriate materials, is easier to eliminate in the process of building the hull and roof itself than to return to it after the completion of all summer cottage construction work.

Project of a house with an attic made of profiled timber

To equip the free space of the attic and supplement the dwelling with an attic, a preliminary analysis of the load-bearing walls and is necessary. This should be done by appropriate experts. After that, it is necessary to remake the inside of the roof using insulation between the rafters, vapor barrier, and appropriate finishing materials. Not every equipped attic of houses can be called.

If it is formed by a continuation of the line of walls up to a height of one and a half meters from the attic floor, then according to the rules of SNiP it is called an attic.

And when the specified distance is higher, then this room is already considered a full-fledged floor. Attic projects take into account the slope of the walls, which is why attic rooms are unsuitable for accommodating such finished furniture as high sideboards and wardrobes.

The original project of a small house with two verandas

But beds, bedside tables, low cabinets for books, radio equipment and small things will fit perfectly into their interior. It is better to use such a living space at home as an office, a children's room or an additional bedroom for guests. In fact, each owner of the cottage, whether it is 6x6 m or 6x8, will always dispose of his attic with the greatest benefit for the whole family.

Thus, the reasons for the need for an attic room are as follows:

Do you need a veranda

An extension to the house with the maximum number of windows is called a veranda. More often, so that in cold weather it is better warmed up by the sun. And in the summer heat, windows equipped with rising curtains or blinds may well protect from the heat.

Projects offer the size of the extension of houses, depending on its purpose. If it is necessary for a functional addition to the kitchen, it will be a place of rest only for your small family, then you can get by with a medium-sized veranda. But if a large company will rest here, and the house itself is 6x8 m in size or even smaller - 6x6, then the veranda area can be enlarged by placing it in the shape of the letter L along two walls of the country house.

Layout of the first floor and attic of a country house 6x6 meters

The main disadvantage of such houses is the low thermal insulation of the walls, and in order to increase this ability and ensure comfortable living in winter, an additional layer of thermal insulation is applied to the inside.

Foam concrete is a success these days. They are inexpensive and will last almost forever. The building material is relatively light, does not burn, does not rot, it is easy to work with an ordinary hacksaw, and when building houses, you can get by with prefabricated and cheap ones.

Brick construction is more suitable for expensive country cottages. It is less popular among summer residents, especially for the construction of summer cottages 6x8, and even more so 6x6 m. The buildings are small, but they will require considerable expenses. Their high cost is increased by the terms of work, the price of bricks, the long construction of walls, and the interior decoration of houses.

But no matter what material a 6x6 cottage is built from, it should include the required premises:

kitchen;
bedroom
bathroom.

Other rooms will also be useful. But if there is not enough usable space for them, attics and verandas help out the owners. The attic space can be allocated for a nursery or a rest room, and a side extension can be used as a dining room or living room.

150x150 150x200 200x200 145x145 145x195 195x195

BASIC COMPLETE HOUSE FOR SHRINKING FROM NATURAL HUMIDITY MATERIAL (INCLUDING ASSEMBLY AND DELIVERY):

Log cabin - timber 150x150 mm (1st and 2nd floor).
All partitions - timber 100x150 mm (1st and 2nd floor).
Raising the walls of the second floor - 1.2 m.
Floor and ceiling beams - timber 100x150 mm. (after 59 cm under the size of the insulation).
Roof gables - beam 150x150 mm (height 2.6 m).
The rafter system is a board 50x150 mm (after 59 cm under the size of the insulation).
Roof outlets at least 50 cm.
Roof sheathing - board 25x150 mm.
Roof covering with ruberoid.
Treatment of the lower crown and genital lags with an antiseptic.
The height of the 1st floor when clear is 2.7 m (+/- 5 cm clear from beam to beam).
The clear height of the 2nd floor is 2.5 m (+/- 5 cm clear from the beam to the ceiling beam).
All consumables (wooden pins, flax fiber (jute), nails, staples, roofing material).
Free delivery in the Moscow region and up to 600 km from our production base.
Assembling the walls of the log house on wooden dowels (dowels);
Dovetail cutting of corner joints (warm corner)
Installation of windows, doors, flooring, stairs and roof insulation are carried out after 6-7 months (after complete shrinkage of the log house) and are not included in the package.
Cleaning waste inside the building and outside in separate piles.

Service	Description	Price
Strapping beam for pile foundation	Serves as a binding for piles and a support for floor beams 150x200	21000 rub
Draft floor on the 1st floor	Edged board 25x100-150mm	20000 rub
Draft floor on the 2nd floor	Edged board 25x100-150mm	20000 rub
Additional crown	Increasing the height of the log cabin ceilings	On request
Replacement of internal partitions	Increase in thickness from 100 to 150 mm	On request
Replacement of floor and ceiling beams from 100x150 mm	for 100x200 mm 1st floor	On request
Replacement of floor and ceiling beams from 100x150 mm	for 100x200 mm 2nd floor	On request
Generator rental	Provided in the absence of electricity on the site, only gasoline is paid	for free
Construction change house size 2x4	In the absence of housing for builders (after construction remains with the customer)	18 000 rub.
Profiled timber "under the block house"	Rounding the outer side of a profiled beam of any section.	For free
Project mirroring		For free
changing the project without increasing the material		For free

Select the construction site on the map and the shipping cost will be calculated automatically

View dimensions

STAGES OF COOPERATION

First contact.
We discuss the main issues by phone or e-mail.

Coordinating construction details on site. It is important for us to know the location of the house on the site and the way to get to it.

Signing an agreement.
We draw up a transparent contract. Prepayment 1% - 5%.

Delivery of the house kit to the site, the arrival of the brigade. After unloading, 74% of the cost is paid.

Building a house.
The term of construction of the house "under shrinkage" is 14 - 30 days, depending on the object.

Acceptance and guarantee.
Signing of the act of delivery - acceptance and payment of the remaining 25%. Warranty 3 years.

Project description:

Before you is a project of a 9x8 house with an attic, with a total area of 122.5 m². The best architects and designers worked on its creation - the house has a spectacular appearance and a very convenient layout. The main features of the exterior of the mansion are a neat large bay window that runs along the entire height of the building, a non-standard roof structure and a cozy terrace of 10.5 m².

On the ground floor there is a spacious living room (20.3 m²), a comfortable hall, a bathroom, as well as a guest room and a comfortable kitchen (12 m² each). The second level is occupied by three private bedrooms, which can accommodate all residents of the cottage.

DO YOU HAVE YOUR OWN PRODUCTION?

Yes, we have our own production. We are engaged in the preparation and production of lumber of any section. We are also directly engaged in felling log cabins of various types (“bowl”, “in the paw”, guarding a log under a planer, as well as under a scraper).

HOW LONG TIME HAVE YOU BEEN ON THE MARKET?

"KostromaPlotnik" has been working in its field for 5 years and already at the moment has a good reputation for the quality of service, work and supply of material.

WHY YOUR FIRM?

I want to answer you as the head of the firm. We bear a great responsibility for the material supplied by us, its installation. We give home guarantees. Only Russians work for us, professionals in their field (which is not at all important). We love to build houses, we love to work and communicate with people. We have the best prices for the construction of houses. Often people look only at the cost of the work, and not at the quality. I can give an example of such a situation. Some time ago I received a call from a customer. He was very upset. They started the first construction - a bathhouse. The customer was looking for a cheap option and found it. The bath came incomplete. Even the workers were not provided for the construction. Although everything was written in the contract. The quality of the cutting itself was disgusting. Calling the company, he was simply answered: "What you ordered, you got." After that, the customer contacted us. He was given a brigade. When they arrived, they were shocked by what they saw. As the saying goes: "the hands of these masters would be torn off." That's what they say low price and attitude to work. Advice for the future, always think through your decision! As for the Customer, my workers have assembled a good bathhouse. A year later, he ordered a good solid house from us.

Dimensions: 6.0 x 4.0 m. Living area: 48 sq.m. Built-up area: 36 14

Complete set	Economy	Standard	Suite
Foundation	Support-columnar.
Base
floor joists
Draft floor		From edged boards 20-22 mm.
Exterior walls		From profiled timber

Dimensions: 6.0 x 4.0 m. Living area: 48 sq.m. Built-up area: 36 sq.m. Construction time (days): 14

Complete set	Economy The country house, is intended for use at positive temperatures.	Standard The house is designed for use in temperatures from -5 degrees and above.	Suite House for year-round use.
Foundation	Support-columnar.	Pile-screw, the cost is calculated when ordering.
Base	Double from a bar 100x150 mm. Bar of natural humidity.	Double from a bar 150x150 mm. Bar of natural humidity.
floor joists	Board 40x150 mm. On the rib. With a step no more than 800 mm.	From a bar 100x150 mm. With a step no more than 800 mm.
Draft floor	From a semi-edged board with a thickness of 20-22 mm.	From edged boards 20-22 mm.
Exterior walls	From profiled timber 90x140 mm. natural humidity. Wall thickness 90 mm.	From profiled timber 90x140 mm. natural humidity. Wall thickness 90 mm.	From profiled timber 140x140 mm. natural humidity. Wall thickness 140 mm.
Ceiling height	Not less than 220 cm. 17 crowns.	Not less than 235 cm. 18 crowns.	Not less than 250 cm. 19 crowns.
Partitions	From profiled timber 90x140 mm. natural humidity.
Floor and ceiling insulation	Mineral wool 50 mm thick.	Mineral wool 100 mm thick.	Mineral wool 150 mm thick.
Roof insulation	Ondutis or its analogues.
Roof		Ondulin, color (brown, red, green). By choice.	Metal tile, color (brown, red, green, blue). With counter rail.
Double insulation in insulation	Ondutis or its analogues.
Ceiling and second floor	It is sewn up with lining of coniferous breeds of a class "B" of chamber drying.
doors	Wooden paneled hinged, locks and handles are not installed.	Entrance - metal China. Interroom - paneled.	Entrance - metal Russia. Interroom - paneled.
Window	Wooden with double glazing, opening sash, sealing rubber and fittings.		PVC with single-chamber double-glazed windows. Includes window sills, ebbs and mosquito nets.
In door and window openings		Casing swarms are not installed.	Casing swarms are installed.
Finished floor	From a sheet pile board with a thickness of 27-28 mm. Chamber drying.		From a sheet pile board with a thickness of 32-36 mm. Chamber drying.
Gables	Frame from the outside are sewn up with lining class "B" of chamber drying.		Frame from the outside are sewn up with a block house or imitation of a beam of class "B" of natural humidity.
Cornices	Not less than 250 mm. Hemmed with clapboard chamber drying.	Not less than 400 mm. Hemmed with clapboard chamber drying.	Not less than 500 mm. Hemmed with clapboard chamber drying.
truss system	The base of the rafters is 150x40 mm. Slopes 100x40 mm.	From edged board 150x40 mm.
Joining the log house in the corners	Assembled in a checkerboard pattern.	in a warm corner.
The log house is going to	Metal nail.		Wooden dowel.
All horizontal and vertical corners of rooms	Closed with a plinth made of coniferous wood.
Finishing done	Galvanized nails.
Staircase to the second floor is being installed	With railings, balusters and fencing on the second floor.
At the entrance	Steps are being made with a platform.
Delivery	Over 550 km overrun is paid from 70 rubles per 1 km.

In construction, materials up to 6 meters long are used, so joining of materials is allowed.

On the built house (bath) is given warranty 3 years from the date of signing the Act of acceptance and transfer of the object, namely:

For roof leaks (Temporary roofs made of glassine, tar paper or similar materials are not covered by the warranty.)
For structural integrity (Swelling of the lining and changing its color, swelling of doors and windows due to moisture due to improper operation of the object is not covered by the warranty.)

How we are working:

You need to make a call or write an email
The manager will contact you and discuss all the details
Employees will calculate your object for free
Preparation of contract
Delivery of materials and arrival of a team of builders
Construction of an object
Acceptance of your order.

You can apply for "Construction of a house from profiled timber 6x4 Ratmir" directly on the site, indicating the contact phone number.

Our manager will contact you.