Installation of the heat exchanger of the Ermak 16 furnace in the bath. Ermak bath stoves: model range and prices. Ermak furnace installation

Date of writing: 23.04.2022

Reading time: 20 minutes

The Ermak-16 stove, along with other heater models, is a heat generating device for effective heating of water, warming up the room and obtaining a sufficient amount of steam, which creates a special microclimate in a sauna or bath.

Description of the furnace for the bath "Ermak-16"

Wood-burning sauna stove-heater "Ermak-16" - modified heating system, which solves the problem of ensuring the steam regime and has some special features, reflected in the characteristics, dimensions and rules of operation.

Specifications

The steel structure has the following important characteristics:

chimney pipe diameter 11.5 cm;
dimensions - 59.5x44.5x73.0 cm;
depth of the furnace compartment - 50 cm;
the volume of the heated room - 8-18 m³;
structure weight - 56 kg;
maximum mass of stones - 60 kg.
color - the black

The standard generated power of the Ermak-16 wood-burning sauna stove is 16 kW.

Reference. In the production of stoves are used reliable, environmentally friendly and safe material, as well as modern technological processes of cutting and bending, welding and shaping of the metal base.

Scheme of the sauna stove

Standard scheme furnace design is represented by:

Prefurnace tunnel, allowing the placement of the firebox door inside adjacent rooms, which makes the operation of the furnace convenient. Due to the rigid design, installation and dismantling of the system is facilitated, and the presence of a thermal gap eliminates overheating. The tunnel is complemented by a decorative frame element, a self-cooling spiral-shaped safety handle and comfortable panoramic glass;

Photo 1. Scheme of the structure of the Ermak 16 sauna stove. The arrows indicate the main parts of the device.

Remote firebox of increased length, providing the convenience of a volumetric fuel bookmark and guaranteeing the optimal length of burning time with shedding ash directly through the grate;
Open heater with ventilated mode of operation and a large volume of stones that warm up efficiently and comprehensively. The increase in heat capacity is caused by hanging a special grid-heater;
gas duct system, the design of which is responsible for the complete combustion of fuel in order to obtain maximum heat transfer, as well as the effective removal of smoke and burning from the bath room;
Scoop ash pan with control function, providing air flow to the furnace section and facilitating the removal of all combustion products;
Casing-convector to create an optimal convective flow of heated air masses and protection from infrared radiation.

The matte black casing is coated with high quality silicon-organic coloring composition, and steel frames are made on the basis of mirror stainless steel.

The strict, but quite modern design of the structure is represented by ergonomic shapes and a traditional color scheme, which is relevant when arranging a sauna or bath in a classic style.

Device modifications: with a water tank, convector screen and others

Heating structure designed for operation in a Russian steam room or a Finnish bath.

Equipped with advanced functionality twelve optional variants or "PS" model equipped with a panoramic glass door.

Thermally loaded elements are characterized by the use of steel with a thickness 0.6 cm, and a steel sheet is used for the body and gas duct - 0.3-0.4 cm.

The modification can be represented by a convector screen, a heater grid, a hanging tank and a universal heat exchanger for connecting an external tank.

Wood-burning sauna heaters from the 16 series are also represented by modern designs "Ermak-Elit 16-S" and "Ermak-Elite 16-PS" made from stainless steel.

Operation features

The classic series has several features, for convenience and ease of use:

non-deformable combustion chamber;
door with cooled spiral handle;
remote pre-furnace tunnel;
four-sided heating of the heater;
evenly distributing heat system;
ease of self-assembly.

Elite models are characterized by the presence heat-resistant glass insert in the door and oversized stone based on stainless steel. As additional modules, a hinged type tank and a grid-heater are used, which are mounted on the rear wall of the furnace.

Attention! During operation, at the very initial stage of the furnace, it is recommended to keep the steam room door open, and close it only after boiling water in the tank - in about a couple of hours.

Useful video

Watch the video, which demonstrates the first heating of the Ermak 16 sauna stove.

Among the wide variety of methods for bath stoves, a larger section of buyers likes not to build a brick stove, but to install a ready-made purchase model.

This reduces the installation time, makes the interior predictable at the first stage without various gifts. Due to the fact that furnaces are produced according to a specialized project, which is tested in design offices, and therefore, for the established indicators of the room, it makes it possible to create a furnace that produces heat with an installed capacity, which is enough. Ermak bath stoves are considered one of these methods that consumers choose.
They have a couple of options for standard systems, which can be selected as a complete set of a car in a car dealership. It all depends on the options selected, such a device can be adapted to all needs, also the generation of steam, heating water and rooms.

It is hardly possible to consider the use of one type of fuel as a priority, but the heating devices of this brand use wood. And therefore, due to the conditional cheapness of such fuel in a number of regions, it can be distinguished that this is a successful selection.

Furnace Ermak 12

The Ermak 12 Furnace owns the minimum power suitable for small one-room premises. As the name implies, it will be only 12 kW. According to the calculations of the designers, this should be enough for exactly 12 m3 of heated space - 1 kW per 1 m3. The PS model has a very high power of 14 kW.
Due to the fact that this device is made of high reliability steel with a thickness of 3 mm, its weight is relatively small and will be 52 kilograms. Therefore, it can even be installed by a small team of workers.
The dimensions of the apparatus of this series create 520 * 425 * 690 mm. And so it fits very easily in a small room.
With such unpresentable dimensions, it heats a tank with a capacity of 35 liters or 40 kilograms of stones from a heater mesh, which is optionally placed on the body of the heating device.

Furnace Ermak 16

Mod range models series 16 3 variants of furnaces are connected with a power of 16 kW naturally.
Top models of this series are distinguished by the fact that they are made of stainless steel, which in no way affects the quality of work, but only increases the service life and affects the weight of the system.
Also, 17% chromium is included in the alloy used to create them, which also affects the appearance.
Everything depends on the model, the weight of the stones will be approximately 45 to 50 kilograms.
The weight of the oven also varies, but not significantly 50 and 59 kilograms of course.
The volume of the tank to heat water varies from 40 to 55 liters for any model, regardless of the composition of the system.
The main advantage of these stoves is that they can be installed both in the sauna and in the sauna.

Furnace Ermak 20

Models of the 20 series also have similar good qualities.
Their number has been expanded to 4x.
Which power is 24 kW.
Their weight will be 54, 60, 70, 71 kilograms naturally.
The number of stones has been increased to 60 kilograms, and the volume of the water tank has not changed to selection.
Like all models of the brand, they have a chimney with a diameter of 115 mm and cast iron grates.
It should be emphasized that Tops and ElitPS models are equipped with a viewing window in the firebox door, made of glass resistant to high temperatures.
They have a 2-flow gas expansion design. The depth of the furnace is also important, it will be 550 mm.

Ermak furnace installation

A specially designed furnace design makes it possible to put them to the maximum in a short time, which is helped by their compactness and low weight. Before installing the furnace, it is imperative to establish a foundation for it. It must be personal and free from the foundation of the bath. It will be installed on it. Instead, you can use a reinforced concrete monolithic version or with brickwork at the discretion of the master.
The stove can be installed directly in the sauna or at the same time in the sauna and dressing room through a hole in the wall. The components of the apparatus are connected using a heat-resistant sealant designed specifically for similar work. It will also be required to install pipes that discharge combustion products.
The size of the pipes must correspond to the size of the flue outlet installed in the furnace. The pipes are connected to each other by means of coupling joints. For them, in most cases, suitable grooves are taken into account. Pipes in the unheated part of the room, for example, on the roof, must have an insulating layer, i.e. made in the form of a sandwich system. In the place of ceilings, they must be insulated with non-combustible thermal insulation from walls and ceilings.
A tank for heating water can be installed directly on the stove in the absence of a heater, or connected through a specialized radiator and placed in another living area, for example, in a washing room. Installation details are contained in the manual, which Ermak sauna stoves have in the delivery package.

Updated:

2016-08-14

Ermak stoves are high-quality Russian-made bath equipment. These ovens have earned great respect among consumers due to their excellent technical characteristics and affordable cost. Ermak offers a wide range of sauna stoves, which we will introduce you to in our material.

Photo of the Ermak furnace

Ermak furnaces can be divided into three types depending on the type of fuel used:

Wood;
Combined;
Electrical.

Plus, all Ermak products are divided into two categories:

Ordinary devices. This is furnace equipment, the design of which provides for the use of high-strength steel with a thickness of 3-4 millimeters. The grates are made of cast iron.
Elite. The Elite category is made of stainless steel, and the doors and grates are made of cast iron. In this case, the doors must be equipped with heat-resistant glass.

Wood stoves

The demanded furnace Ermak 12 is characterized by a power of 12 kW. Her weight is 52 kg. It is equipped with an external tank with a volume of 35 liters. Designed for space heating up to 12 cubic meters;
The Ermak 16 model weighs about 60 kilograms, and the weight of the stones used is up to 45 kg. The stove is equipped with a tank with a capacity of 40 to 55 liters. Model 16 with its 16 kW of power heats up to 16 cubic meters of space;
Ermak 20. Like model 16, Ermak with an index of 20 is equipped with a remote firebox, which allows you to heat the stove from another room. Steel contains 17 percent chromium, which increases the technical characteristics of the device. Great for saunas and baths. The Elite version is distinguished by fire-resistant glass on the door, which provides an attractive appearance of the firebox when burning fuel;
Ermak 30. The latest model from the manufacturer, which is distinguished by increased power and more impressive weight. Such a model with a tank of 45-55 liters provides heating up to 35 cubic meters of area;
Ermak 50. Another representative of the latest series of sauna stoves made by a domestic manufacturer. The power rose to 50 kW, due to which the heated area also increased. It is recommended to equip such an oven with a tank with a volume of 55 to 65 liters.

Combined stoves

Reviews clearly demonstrate that Ermak stoves are modern bathing equipment. Not only the Ermak 16 models with their 16 kW of power deserve your attention.

An interesting series of ovens are combined devices.

The peculiarity of the combined stove equipment is that the stove can run on wood and gas;
To switch to gas, a special burner is installed on the stove;
Such stoves are great for baths and saunas;
Due to the equipment with a tank and a heat exchanger, the stove allows you to heat the steam room, provide heat to the locker room, supply hot water to showers, prepare steam and heat water;
Models with a heat exchanger are characterized by versatility at an affordable price;
The most popular model is called Uralochka 20T. Its power is 19 kW. Paired with a heat exchanger and a tank, the furnace is ready to provide heat, water and steam up to 20 cubic meters of area;
There is a Uralochka model from Ermak for 12 kW. With a tank and a heat exchanger, such stoves heat up to 12 cubic meters of space;
The furnaces of Ermak combined furnaces are made of stainless steel. The thickness of the steel is 3 mm;
In addition to being equipped with a tank and a heat exchanger, the stove is equipped with automation. She is responsible for maintaining the set temperature, she can independently turn off the stove from operation in the event of a gas supply interruption, a drop in thrust below the permissible level, or when the air inside the steam room overheats;
Ignition of the burner and ash pan must be done manually;
Experts recommend additionally equipping the device with a tank of 45-50 liters.

Ermak combined stoves have undeniable advantages. Let's name the main ones.

For the manufacture of stoves, high-quality modern materials are used.
The stoves are compact in size and attractive in appearance.
Devices are environmentally friendly and safe.
The design provides a high degree of resistance to possible fires.
The ovens are repairable. With a used heat exchanger, when replacing it, there will be no problems for a beginner.
Long service life.

Electric stoves

Yermak also offers a range of electric ovens to the market.

Their main area of application is saunas. Their popularity is due to ease of installation, lack of careful maintenance to maintain the furnace in working condition;
Plus, electricity does not emit any substances, vapors, since there are no fuel combustion processes;
Having studied the extensive model range, you will be able to choose for yourself the ideal option for the Ermak electric bath stove;
Long service life due to the use of stainless steel in the manufacture of stoves;
The main body is covered with a layer of mirror steel. This improves convection, increases the external attractiveness of the stove.

Due to its advantages and capabilities, Ermak electric furnaces have become in demand abroad.

Features of classic and Elite stoves

When choosing Ermak 16 stoves with a power of 16 kW and a heated area of 16 cubic meters, or an Elite modification with similar technical characteristics, it is important to pay attention to the features of each category of stoves from a Russian manufacturer.

Distinctive features of Ermak's classic bath stoves are:

The devices are made of thick steel sheets, which is due to the greater weight of the furnace structure.
The furnace furnace is not deformed under temperature loads.
Pre-furnace tunnel of remote type.
Doors are equipped with cooled handles. This allows you to safely take them even when the oven is running.
The stove heater is heated from four sides.
Furnaces can be equipped with a heat exchanger. When working together with a heat exchanger, the stove creates steam, raises the temperature in the steam room, heats water, heats neighboring rooms, etc.
The design of Ermak furnaces provides protection against infrared radiation.
The equipment evenly distributes heat throughout the room, creating an optimal microclimate inside the steam room.
A novice is capable of installing and operating such a furnace. The only requirement is to study the manufacturer's instruction manual and follow it clearly.

As for the Ermak Elite series, there are three distinctive features of the equipment:

The doors are tempered glass. This allows you to get the effect of a fireplace, watch the fire while relaxing, monitor the condition of the firewood;
The firebox is made of heat-resistant stainless steel;
The heater has an increased volume compared to the heater of a standard stove.

Many fear that due to the use of stainless steel in the manufacture of the Elite series, ovens have proven to be less reliable. This is not true. The use of stainless steel only benefited the design, which began to weigh less. The quality and strength characteristics remained at the same high level.

Ermak is a manufacturer of various heating equipment for baths. In this assortment, each consumer will find a model to his taste and pocket. The starting cost of stoves is from 10 thousand rubles, which allows you to make a small bathhouse in the country or build a whole bath complex.

Many owners of private country houses are throwing about their own baths. When arranging these structures, many consumers are faced with the choice of which heating device is best to choose. Today we will talk about Ermak sauna stoves, and also consider their characteristics and nuances of choice.

Peculiarities

This company is one of the most popular among buyers. Its products can be used both in small baths intended for several people, and in extensive steam rooms, where a considerable number of people are accommodated. The equipment of this manufacturer is divided into electric, combined (it is used for gas and wood) and wood (used for solid fuels) depending on the fuel used.

Combined units deserve special attention. In the manufacture of such a device, a gas burner is necessarily mounted in it. In addition to such a mechanism, the furnace is also equipped with special automation, a stepped chimney, a pressure control unit, and a temperature sensor. It should be noted that in this type of product, the entire heating system turns off on its own if the gas supply stops.

This manufacturer manufactures two types of bath equipment: ordinary and elite. Conventional heating systems are made from a solid steel base with a thickness of 4-6mm. As a rule, such material is supplied with additional cast iron grates. Elite products are made of stainless steel 3-4 mm thick. A fire-resistant glass door is attached to such elements during production.

Bath devices manufactured by this company have a considerable number of various additional options. With this, you can add new features to the equipment.

Any owner of such a stove can easily make a heater out of it. Manufacturers also offer consumers other modern options (mounted or remote tank, universal heat exchanger, special grill-heater).

The lineup

Today, in the construction market, consumers can find different models of stoves for the Ermak bath. One of the most popular is "Ermak" 12 PS. This heating equipment is small in size, so it should be installed in small baths. It is important to note that such a product has a high heat transfer. It is worth using different types of solid fuel for it.

Another popular model is the stove. Ermak 16. This device will also look compact and small in size. But at the same time, unlike other samples, it is designed for a large amount of heating. That is why such equipment is most often used in bath rooms with a large area.

The next sample is "Ermak" 20 standard. It is subdivided into several separate furnaces with different capacities. Unlike other models, it is equipped with a special dual-flow gas exhaust system. Also, this type is distinguished by a deeper firebox (up to 55 mm). The volume/weight of the water tank of this type of stove can vary greatly. The appropriate size of such a part should be chosen depending on the scale of the room.

Model Ermak 30 differs greatly from the previous ones in its weight, power and volume. This sample makes it easy to install the heat exchanger and heater if necessary. If you have such stove equipment in your bathhouse, then it is best to make the steam room open due to too high a humidity level. You also need to pay attention to the size of the chimney (it must be at least 65 mm).

Despite the diversity of the model range of bath stoves of this company, they all have a similar structure and consist of the following elements:

chimney;
round firebox;
convector;
cast iron grate;
chipper;
remote tunnel;
hanging tank with water;
retractable ash pan;
closed or open heater;

Pros and cons

According to some experts, the bath devices of this manufacturer have a number of important advantages, which include:

low cost;
durability;
beautiful and modern design;
convenient remote tank designed for firewood;

large compartment for stones;
ease of installation;
rapid heating to a certain temperature;
easy care and cleaning;

Despite all the positive qualities, the furnaces of this company also have their drawbacks:

cool down quickly;
after installation, the equipment must be used several times with open doors, as it takes a long time to get rid of harmful oil residues;
if the thermal insulation is not carried out correctly, the power drops sharply;

Mounting

Before installing the furnace itself, it is imperative to conduct thermal insulation of the room. As a rule, it is made using mineral wool or glass wool. Special attention should be paid to the floor covering on which the device will stand. Do not forget about the wall to which the equipment will be attached. After all, it is these parts of the room that are most exposed to the action of the mechanism. Only after carrying out high-quality work, you can safely bathe in the bathhouse without thinking about safety.

After carrying out thermal insulation, a detailed sketch of the future stove should be drawn up. It is better to immediately make a drawing for gas and a diagram for metal. The figure needs to reflect all the elements of the future device.

The compiled image will help you avoid gross errors during the installation of this bath equipment.

After drawing up the drawing, it is worth strengthening the base. As a rule, it is made of a strong metal sheet of great thickness. The main body of the future product is fixed to the resulting installation. This procedure is carried out by welding. This design is quite strong, reliable and durable.

The installation of the chimney deserves special attention. Before installing it, be sure to carry out additional thermal insulation to ensure safety. To the place where the pipe crosses the ceiling, a special metal crane should be placed. This design will prevent strong heating of the ceiling and roof from the sauna stove.

Structurally, Ermak furnaces differ little from Russian and European counterparts. The same principle of operation, design and layout in the heating system. But this is only at first glance. In fact, stoves, boilers, fireplaces and water heaters are more thought out, brought to their logical conclusion, both in terms of functionality and safety. Convenient operation, a developed network of service centers, inexpensive maintenance - all these are the components of high-quality equipment.

A few words about the company

The Ermak company was established in Kirov. Its main direction is the manufacture of parts and the assembly of wood stoves. The high quality, which was typical for each manufactured Ermak furnace, made the products popular and well-known in the domestic market and became an impetus for the development of industrial capacities.

In 2005, the manufacturer begins cooperation with the Ulyanovsk gas equipment plant, which made it possible to launch the production of a gas-fired stove-heater.

In 2008, the production was re-equipped, the latest equipment was installed, which allowed the company to reach a new level and offer the buyer high-quality products.

Today, "Ermak" is a number of research and design bureaus, as well as several manufacturing enterprises and trading companies in Russia - Moscow, St. Petersburg, Krasnodar, etc. The products of this brand have been repeatedly awarded with diplomas and medals, it has received unprecedented recognition among the consumer.

VIDEO: What installation mistakes are often made

Model range and prices for Ermak sauna stoves

In the assortment of the manufacturer there is a large selection of stoves for baths, electric heaters and water heaters. Consider the most popular models.

Ermak 12

The compact heater is suitable for Finnish saunas and baths with a room volume of 6 to 12 cubic meters.

Ermak 12 model 2012 release

Specifications:

Among the advantages of this model it is worth highlighting:

the presence of a hole for easy cleaning of the chimney;
capacious open heater;
extended functionality;
structural rigidity;
advanced heat transfer system;
cast iron grate and self-cooling handle.

For Ermak 12 furnaces, steel 6 mm thick is used as the main material, and for the body and gas duct system - steel 4 mm, lined in places of thermal loads up to 6 mm.

The average price for this model is 11,700 rubles.

Ermak 12 Grid Classic

The sauna stove is designed for soft and quick heating of a compact sauna with a steam room volume of up to 12 cubic meters. with the possibility of installing a heat exchanger in an external tank for the purpose of heating water.

The peculiarity of the model is that for its assembly all the elements were produced on imported equipment, which is an additional guarantee of the high quality of the product.

Other benefits of the oven include:

Large firebox - you can load firewood up to 50 cm long, the capacity is 35 liters.
Cast iron grate has increased strength, it closes the bottom of the firebox, protects it from overheating.
Chimney diameter 115 mm - makes it possible to choose additional options for the pipe.

The remote unregulated combustion channel makes it possible to lay firewood from an adjacent room. The cleaning hole is located on the top of the furnace, so the maintenance process of the device is simple and convenient. Self-cooling handle available.

The cost of the furnace is 12,000 rubles.

Ermak Uralochka 16

A compact model that has earned special love from the residents of Kirov. Universal sauna stove "Uralochka", in which it is possible to use two types of fuel - wood and gas. Designed for space heating from 8 to 16 cubic meters. m. to receive hot water and steam.

Among the advantages of the model are the following:

A specially designed heat exchange system of the firebox allows you to evenly distribute heat.
Spacious and ventilated open heater.
Special design of chimneys with additional length of passage of flame and flue gases.
The structure is made of steel with a thickness of 4 mm, and the elements on which an increased thermal load is placed - 6 mm.

Minus the product - the gas burner is not included in the kit.

The cost of this Ermak model with standard equipment is 14,000 rubles.

"Uralochka" 16 with automatic

The Uralochka 16 stove is a gas stove for a bath from a well-known manufacturer, which uses low-pressure natural gas as fuel. The oven is completely safe, designed for those who value high performance and efficiency.

The kit includes a gas burner with automation and a temperature sensor, piezo ignition and a security system that turns off the gas supply in the absence of draft or when the gas supply stops.

It is worth highlighting other advantages of the design:

Powerful burner.
The unique heat exchange system of the furnace design, evenly distributing the load.
Spacious stone.
Central placement of the chimney.
The chimney has a special design with an increased length of passage of the flame and gases.
The fire chamber is made of heat-resistant stainless steel.
The design is additionally decorated with casing inserts.

The kit includes the following options - a heat exchanger, a hinged tank (optionally remote), a mesh-heater, a steam generator and a screen-convector. Price - 25,000 rubles.

Ermak 24 Luxury Gold

The leader that the range of Ermak brand furnaces with a solid set of interchangeable options can be proud of. In the model for the furnace and chimney system, special heat-resistant steel 4 mm thick and 17% chromium was used. The power is 24 kW, designed for a room volume of 16 to 23 cubic meters.

Ermak 24 LUX GOLD

Among the technical features is the ability to change the door with glass in a stainless steel frame from the right side to the left. Designed with a self-cooling handle.

Possibility to use a closed heater and get fine steam.
High performance and quality.
Rapid heating of the room.

In addition, it is impossible not to note the stylish execution of the model - a bright design and a golden frame made of high quality heat-resistant stainless steel.

The cost of the furnace is 107,000 rubles.

Ermak 20 Premium

The Ermak 20 Premium sauna stove is a modular design of medium power, in which the manufacturer has provided a large number of interchangeable options. Using a closed heater allows you to make any climate in the room to your taste - a Russian bath, sauna, hammam.

Ermak Premium 20

Among the advantages of the model, we note the following:

The vault of the furnace is made of high-quality gray cast iron 10 mm thick.
Modular design - 24 options in one model.
Spacious firebox with a log length of up to 55 cm.
High performance and quality of use.
Rapid heating of the room.
Reliability - the manufacturer gives a 5-year warranty for this product.
The presence of a reversible door with panoramic glass.
You can use a closed heater and thus get fine steam.
Excellent ergonomics saves space in the steam room.

The furnace is executed in classical execution - the black opaque shade prevails.

Ermak Stoker 120 Aqua-C

The Ermak stove Stoker Aqua is a model of a line of garden equipment, which is distinguished by a fast heating period and long burning. This device combines a modern and classic Russian stove, as well as the qualities of a boiler with powerful convection. It can be used for space heating up to 120 cubic meters. Power 6 kW.