Frame house 6x6 layout. One-storey Sort: ascending by price. stage: Overlapping and roofing

Date of writing: 23.04.2022

Reading time: 35 minutes

Housing from inexpensive frame-panel structures is built quickly, but is relatively inexpensive. Projects of frame houses 6 by 6 are extremely popular. The fact is that the ratio of all important indicators (construction price, usable housing area) of these objects is recognized as optimal.

Already from the name of the object, we can conclude that it is a rigid frame, which is sheathed on the outside. The possibility of quick construction and the budget of such a dwelling have long made this type of construction extremely popular.

There are some nuances that you should pay special attention to:

Not a very good indicator of environmental friendliness. It consists of the following: synthetic, a large amount of adhesive, means for wooden elements. Responsible material manufacturers carefully monitor the content of harmful formaldehydes when using the substances they need. When working with unfamiliar suppliers, it is difficult for the average consumer to recognize the various disruption technologies.
a one-story 6 by 6 house is almost impossible to redevelop. It is manufactured at the factory according to the selected project, and after completion of the work, it is not possible to make changes. Do-it-yourself "correction", or editing, can have a significant impact on the overall safety of the building. Crafted panel elements in this regard have some advantage: they are easier to correct or replace if necessary.
The frame is made of wood, and like any kind of it, it is a rather capricious material. The insulation laid inside the walls serves as a bait for all kinds of rodents and pests. This is easily solved - a certain amount of chemicals. But as noted above, this does not improve the quality of the environmental friendliness of the building.
Panels 6 6 have a rather impressive weight. Accordingly, to simplify the assembly of the frame, it is important to use technology and a qualified approach. With independent construction, it is also important to strictly follow all the recommendations, strictly following the existing plan. Otherwise, not only the appearance of the building, but also its safety may suffer.

We build on our own

How possible is it to build 6 by 6 with a veranda without the involvement of professionals, and without the use of factory "semi-finished products" for construction? In fact, this is quite possible, moreover, it is a commonly used practice.

Project

house project

Even a simple one cannot be built without a thorough detailed one. Without the necessary package of papers, any erected structure is doomed to demolition, sooner or later. The point is not that they want to rip off additional funds from you, and not in someone's tyranny. The reason lies elsewhere - without the research of qualified professionals, projects of even frame structures can pose a real threat to people's safety.

At the initial stage, before starting work, you will have to contact the architectural department or design bureau for a project or drawing frame house.

There, experts will analyze your specific situation regarding technical conditions, preferred type, layout and even the appearance of the future home, and make the necessary calculations for a frame house.

When permission is obtained, a well-thought-out and competent project is approved much more successfully than a clumsy home-made sketch or sketch.

Material: what do you prefer?

Building a house with your own hands

Probably, it is not worth explaining that the final result of construction work directly depends on the quality of the selected raw materials:

For the manufacture of the frame, a certain size is selected. Its cross section must be such as to withstand the expected loads at any time of the year. The most suitable material with a cross section of 20 centimeters. This is usually used in the construction of winter-type dwellings.
What to choose for the construction of durable and? What materials are optimal for a 6 by 6 frame house? It can be, for example, fiberboard or. Their main difference lies in the components - more or less large sawdust. As a filler, double or special extruded is used.
The design is also a frame. You can use a lighter one with a smaller cross section. Particular attention is its quality: it should not have any flaws, even of natural origin. Roof design features are dominant when choosing. The point is the angle of inclination: the material should be more structural, the steeper the slope of the roof.

All wooden elements of a 6 by 6 frame house must be properly prepared before being used. Impregnation and treatment with various protective compounds will protect the tree from pests and damage.

Foundation of the house

A neat frame house with a weight is much lighter than a similar-sized structure made of solid logs or bricks.

For this reason, it does not need a monolithic base. And what can it be?

All columnar bases have one important drawback - the cold floor in the room. To avoid such a nuisance, you will have to pay attention to its thorough insulation.

Walls

a frame house can be compared to a kind of multi-layered pie, consisting of many different layers, including protective ones.

main from ;
indispensable;
chipboard;
required layer ;
crate, one of the types of decorative.

Inside, under chipboard, is placed. Its role can be played by a special diffuse membrane. The design of such a "pie" is easy to make with your own hands. Layers can be mounted in stages, or you can make them in advance, and only then insert the completed shields into their intended place.

rafters

The device of a frame house does not differ from that for roofs of heavier objects. The system is the same - a combination of trusses, rafter legs, and gables.

It was noted above that the value of the slope angle determines the nature of the material. In order for snow to easily slide off the roof without lingering on it, it is better to use options with metal for coating - or.

Do-it-yourself installation: typical mistakes

Before starting construction work, it would be nice to evaluate your own strengths. Amateur builders who do not have professional skills often make fatal mistakes, the consequences of which can be more serious than it seems at first glance. This is not only a decrease in the operational comfort of the dwelling, but even its collapse in extreme cases. What's important?

Wood for construction must be of the proper quality. Wood of normal humidity, or dried in a factory way, is much less deformed, thereby ensuring the strength of the structure. This provision does not apply to untreated, raw whips. What is the risk of using unprepared or substandard material?

The frame is the basis of the entire structure. Therefore, torsion, buckling, or an increase in the stress of some element will cause the entire structure to deform. Both small and partial destruction are possible, and the complete collapse of the entire structure is possible. How to identify a marriage upon purchase? The edges of such bars can be dirty and crooked, if you drop iodine on the surface, it will turn blue.

The quality of a frame house also depends on the price of the preferred materials. It is better not to save on the rigidity of the frame, it can turn out to be more expensive for yourself. Diagonal elements located between upright supports serve as structural reinforcement. Saving on them is categorically contraindicated, even if a very small house is conceived.

It is necessary to take into account the loads coming from above: the weight of the structure, weather manifestations, shrinkage. To increase strength, you can make additional reinforcements crosswise.

Is it possible to properly arrange window and door openings with your own hands? This is also a critical part of the job. Shrinkage of the frame is noticeably less than that of log walls or walls, but it is still there. If this is not taken into account, some risks can be assumed in subsequent operation.

window installation

Before ordering double-glazed windows, you must invite a professional measurer and. The specialist will be able to carry out competent measurements and assess the condition of the openings. Do not stand on such a seemingly trifle. Moreover, most manufacturers provide such a service for free. Rather, it is initially included in the price.

The material purchased and arrived at the construction site should be given special attention. It must be processed, properly stored, ventilated. Proper handling of the material will ensure the output of a high-quality structure that will be used for a long time and comfortably.

If all of the above scared the potential builder, distrusting him of his own capabilities and strengths, you can consider a turnkey service. Such a frame house will cost more, but in this case the price is justified by the reliability and quality of further operation.

But there is no need to be afraid either. Cozy frame house 6 square meters , with a serious and competent approach, it will not become an insurmountable stage for a non-lazy and handy craftsman who has carpentry skills and knows how to use a tool. The main thing in this is to correctly assess your own capabilities, and use the recommendations and rules for the manufacture of frame structures. Then a self-built dwelling will become a source of joy and pride for its owner.

The realization of a long-standing dream - to escape from a stuffy, dusty city was the construction of a 6 x 8 frame house. independent implementation of your project.

Layout plan of a frame house 6 x 8

As usual, before you start doing what, you should at least have a general idea of what needs to be done, from what and in what volume. All these questions can be answered. If you decide to completely manage on your own, then you will have to complete all the steps yourself:

layout;
Constructive decisions;
choice of heating method;
do not overlook the wiring of electricians and plumbing;
the choice of materials for the implementation of all elements of the house.

A separate point should be mentioned the coordination of the project and obtaining a building permit. But here, as they say, everyone decides for himself to go the official way or act at his own peril and risk.

After much thought on the topic of how much space is needed for living, it was decided to stop at the variant of a 6 x 8 frame house with an attic. The first floor is full-fledged residential, the second - attic. Small architectural excesses - a balcony and a "cuckoo" in a simple gable roof.

Using the simplest graphic editors, you can draw layouts:

To visualize the idea, it is already necessary to use specialized software. It, as a rule, also contains a library with 6 x 8 frame house projects, from where you can get some ideas.

General view of a small frame house 6x8.

I took as a basis, on which frame houses are built in North America and Scandinavia. By construct:

wall thickness - 15 cm;
rafter thickness - 20 cm;
overlap - 15 cm;
mineral wool and penoplex are adopted as a heater.

Start of construction of a frame house 6x8. Foundation works

The best time to start building is spring. Then the whole warm season is ahead - you can do a lot before the onset of cold weather. But due to a number of circumstances, work began only in September.

Since the load from a turnkey frame two-story house 6 x 8 with an attic is small and the soil is non-porous (sandy loam), the choice was stopped on a strip monolithic foundation:

laying depth - 50 cm;
plinth height - 50 cm;
tape width - 40 cm.

Reinforcement with a diameter of 12 mm was used to reinforce the concrete. Two armored belts are made in three bars. The rods were connected by tying a binding wire.

The formwork for pouring the tape is made of centimeter plywood and 50 x 50 bars. In total, 18m3 of concrete was required for pouring.

To ensure the possibility of access of construction equipment to the place of pouring the foundation, the entrance to the site was previously backfilled and a drainage pipe was installed in the embankment. I also had to hire a tractor to level the construction site and dig a trench for the foundation.

The top layer of soil inside the foundation is taken out. Geotextiles were laid and a layer of expanded clay was poured. Approximately took about 5 m3. The purpose of this operation was to remove rotting organic matter from the underground and warm the soil.

After complete solidification, the tape is treated with Bitumast waterproofing mastic weighing 21.5 kg. Coating was done by hand with a brush.

An important nuance - in reality, the consumption of mastic is two times more than stated.

According to the instructions, one bucket is enough for 100m / 2. The waterproofing of the basement took almost everything without a trace, although the area there is clearly smaller.

Since the rains were approaching, in order to create more or less tolerable conditions for the continuation of work, it was necessary to buy a used banner and erect some kind of awning over the construction site.

In parallel, a larch board was purchased to make lining under. The foundation had to be slightly topped up with cement to bring it to “0”. When pouring the foundation, small differences of up to 2 centimeters in height were obtained.

Lay 2 layers of Technoelast EPP insulation along the upper edge of the tape. On top of it is a lining board. At the final stage, we fasten all this with anchors to the surface of the foundation.

Everything. The foundation for the construction of a two-story frame house 6 x 8 is ready. Now you can proceed to the implementation of the floor frame and walls directly.

The erection of the walls of a karkan house 6x8

On the lining board, the lower strapping and floor logs are carried out. The cross section of the boards is 150 x 50. The material is the same larch. All connections of parts are laid with polyethylene foam gaskets.

The boards are connected to each other using galvanized self-tapping screws 100 x 5 and, if necessary, fixing perforated corners.

The lower trim is made of two parallel boards installed at a distance of 10 cm. The boards are connected to each other at the corners of the foundation tape and along its entire length every 1 - 1.5 meters. The space between them is densely filled with insulation. In terms of strength, such a design is practically not inferior to a solid beam of similar dimensions or several boards spliced in thickness.

In order to be able to work comfortably and safely, OSB boards 18 mm thick were laid on the logs. With the role of the subfloor, as subsequent events showed, they did an excellent job.

Now it's time to assemble the first wall. The frame is assembled from a pine board 150 x 50. The installation step of the vertical racks is 60 cm. In some places it turned out less - then you will have to cut the insulation along. To ensure the spatial rigidity of the structure, it is imperative to install jibs. Otherwise, the whole structure can develop like a house of cards.

We lay Isoplat between the lower trim and the wall of the first floor. This insert will improve the soundproofing properties of the frame.

The installation of the wall ended already after dark, but very successfully.

Construction is progressing slowly. The awning does its job - protects from rain. Another wall has been erected. There is progress.

At the end of October, all walls and internal partitions of the first floor were installed

Ladder to the next second floor completed.

Purchased, brought and stored materials and components for flexible roofing. The construction of the frame of the pediment begins - a ridge beam is installed.

The role of the roof is still performed by the banner. Even though it's cold, it's dry. As materials are purchased and brought in, they are stored inside the house and under the awning overhangs.

Interfloor overlap is made of the same boards 150 x 50, connected by jumpers. As a result, neat cells were obtained, where mineral wool will then be installed during insulation.

Slowly, the frame of the gables, internal partitions of the second floor and the truss system are being built.

The cross section of the rafters is 150 x 50. The installation step is 60 cm. We install jumpers between them every 80 cm. This will subsequently save time and material when insulating the roof. In the resulting cells, it will simply remain to tightly install the insulation mats.

Roof structure:

wind protection is laid over the rafters (Corotop film, density 140 g/m2);
bar 50 x 50;
inch crate;
plywood 12 mm thick;
soft roof (bituminous tiles).

We are finishing the roof. The 6 x 8 frame house is gradually taking on recognizable shapes.

The windows that got in the way under their feet finally waited in the wings. To finish off all the work with the roof, skylights were first installed. Then came the turn of the windows on the first floor:

hall - four windows 1500 x 1500, single-chamber, one hinged, two - tilt-and-turn;
bedroom - one window 1500 x 800, single-chamber, tilt-and-turn;
bathroom - two windows 1500 x 600 and 500 x 600;
porch - 1500 x 600.

The last to be brought and installed were the central window and the balcony door for the second floor.

The windows were brought in in several passes. As they arrived, they were installed.

It's already cold outside - winter. To heat the premises, a 5 kW Artox heat gun was purchased. In order not to heat the street, empty door and window openings temporarily have to be blocked with improvised materials.

At the time of construction of the door - makeshift plywood. After the completion of the interior and most of the exterior decoration, there are already decent

The project of a 6 x 8 frame house with an attic provides for insulation with Rockwool LightButts mineral wool. Looking ahead, I would like to say that in total it took about 40 m3 of insulation. This is not so little, and it is necessary to think over the logistics of the delivery, placement and use of the material in advance.

Before installing the insulation inside the frame, care must be taken that it does not fall out. To do this, from the outside, we sheathe the entire structure with Isoplat. This material simultaneously performs the functions of wind protection, sound insulation and additional thermal insulation.

The size of the mats is 600 x 800 x 50. Thanks to the pre-set pitch of the racks in the frame, the whole process looks quite simple:

print out the package;
we install a heater between the support bars in the spacer;
if the sizes do not match (unfortunately, it turned out, and so) we cut it with a construction knife to the desired size.

Thickness is achieved by installing mats close to each other. On the walls - three mats (total thickness 15 cm), roof - four (20 cm).

Separate story. An integrated insulation scheme was used (the joint use of foam and mineral wool).

Floor Pie:

penoplex 50 mm;
mineral wool - 100 mm;
vapor barrier Corotop;
OSB - 18mm.

Even at the initial stage, inch boards were nailed to the underside of the log, acting as cranial bars. Penoplex will rely on the formed protrusions.

Since the material is not afraid of moisture, no insulation is required from the underground. Penoplex plates are cut to size with a hacksaw and installed between the lags.

Along the perimeter of the sheets and joints, where we had to gain space from scraps of material, we carry out sealing with mounting foam. We cut off the frozen excess with a knife. It turns out a continuous heat-insulating layer.

Lay a layer of mineral wool on top. The principles are the same - dense installation and laying with an offset so that the seams do not intersect.

We cover the surface of the insulation with a vapor barrier. This will help protect it in the future from moisture from the room. At the very end, we spread the Vibrostek strips along the lags and install the OSB back and fix it with self-tapping screws.

The floor of the attic floor is insulated a little differently:

we hem the ceiling of the attic floor with Tyvek vapor barrier;
the Isoplat plate is fixed;
from the side of the attic, 15 cm of Rockwool are laid inside the ceiling;
from above, we close the entire layer again with thermal insulation;
we lay strips of Vibrostek 4 mm thick along the lags.

We lay a draft floor from OSB 18 mm (the ceiling above the bathroom and bath in a two-story frame house 6 x 8 is made of two layers of waterproof plywood 12 mm thick).

Heating and ventilation of a frame house

Projects of frame country houses 6 x 8 necessarily provide for a source of heating. And this building is no exception.

The main source of heat is a wood burning stove. Gas is not planned yet, you can cook on electricity, and a burning fireplace is just beautiful.

Under the furnace, even at the stage of foundation work, a small patch was poured, not connected with the main foundation. The dimensions of the base are 1.2 x 1.4 m. The height of the base is comparable to the tape. Half a meter buried in the ground and the same outside.

Start - the base of the furnace

The work of the master is arguing, and the turn of the installation of the combustion chamber and the screen quickly enough came. Fireplace door Pisla 510 got relatively cheap for 15 thousand. I managed to find it on sale.

Gradually, the laying of the fireplace is moving forward. Watching the work of specialists is a pleasure.

The future furnace has almost grown to the ceiling. There are no severe frosts yet, which is very pleasing. And inspires some optimism.

It so fortunately coincided that the last windows and the first fire coincided. Let's do the first run. Since the stoves still need to be settled, we heat them without fanaticism - carefully so as not to spoil all the work.

For three hours of the firebox, the temperature in the room rose by sensations of 10 - 15 ° C. Given that the thermal insulation of the house is not yet fully completed, there is no vestibule and instead of the front door there is plywood on hinges covered with a blanket, the result is quite decent.

Now is the time to talk about, in fact, it is a sealed thermos. If there is no ventilation, then at best the air will be musty and stale. In the worst case, the insulation and wooden elements will begin to dampen.

For the ventilation system, I purchased a Domen Regio heat exchanger with a capacity of 250m3/hour and a set of air ducts. The installation allows, in my opinion, to perform the most important function - to regulate the performance and, if necessary, to heat the supplied air. Heating is carried out using a built-in heating element of 1 kW. The maximum temperature of the supplied air can reach + 30°C.

In practice, it looks like this:

we leave for a long time - we set the power of the installation to 5 - 10%;
We return - we translate into a full-fledged working mode.

Installation of the heat exchanger on vibration suspensions, wiring of air ducts and commissioning of the ventilation system was carried out by specialists of the company where the equipment was ordered. It should be noted that the system has started working, there is a slight heating and the impressions so far are the most positive.

Installation of ventilation ducts in a frame house.

Another thing to talk about is electricity. The input to the house was carried out with a 5 x 6 cable. Accordingly, the following were purchased and installed:

bipolar input machine;
switchboard ABB;
distribution boxes and slats;
automatic machines 16-40A (10 pcs).

Wiring inside the house is carried out in a metal hose inside the walls. The passage through the power elements of the frame is made through pre-drilled holes.

The interior decoration was made of my favorite material - wood. Although sometimes a worm of doubt crept in, who wanted drywall and wallpaper. They say it's simpler and more elegant. But the tree still unconditionally won.

I started the cladding from the second floor. Larch lining 110 mm was used, in half grade extra and grade A. The better the material, the easier, simpler and faster it is to work with.

In addition, a better lining has no waste due to the absence of cracks in knots, resin pockets and deformation, which are so rich in grades AB and B.

Interior decoration of the attic walls of a frame house.

It was decided to make the living room a little more pretentious, so that there would be no associations with a beautiful shed:

The bottom of the walls, up to a level of approximately 80 - 100 cm, is still sheathed with larch clapboard. Above, from this level and to the very top, I fastened the lining of the abash. The whole artistic refinement lies in the orientation (vertical) and the alternation of wide and narrow boards. Of course, I had to tinker a bit, but overall it looks very good.

In other rooms, the walls are also sheathed with alternating boards, but in the usual horizontal orientation.

To prevent the insulation from getting wet, it is closed from the side of the room with a Tyvek vapor barrier. The joints were glued with metallic tape.

Slowly, as the finish is completed, you can begin to settle down. Sofa in the attic.

Wardrobe in a niche on the second floor. The closet is very spacious. Somewhere around three cubes. There is where to turn around, or rather meet.

The work is not carried out sequentially one after another, but as the weather permits, the availability of materials, the presence of other urgent matters. External finishing of the frame country house 6 x 8 was made exactly according to this principle.

On top of the installed Isoplata, he pulled windproofing produced by TechnoNIKOL onto the walls. Classic technology:

rolls overlapped by 15 - 20 cm;
stapler fastening.

Everything else was sewn up already in the spring, when it was warm and pleasant to work outside.

The material for the work is still the same - the same lining larch grade A. Advantages - resistant to water, easy to work with (good quality material). Disadvantages - expensive, fragile (it is necessary to drill holes for fasteners).

Roof overhangs and wind boards on the gables were sewn up with plastic. Durable (does not rot), aesthetically pleasing and easy to install. No matter how you look at it, there are positives everywhere.

Landscaping

The house is almost ready. You can already live. Although there are still many shortcomings. It's time to improve the site and ensure a comfortable life.

So let's start with the fence. Poles for the gate. Casting of the base, profile pipe, lining with facing bricks. Everything seems to be clear, there is nothing archaic and cunning.

By the same principle, we make the entire fence of 40 meters. We attach painted corrugated board to the posts. As they say cheap and cheerful.

The most important part of the fence is the automatic sliding gate. Very convenient, although not so cheap anymore.

Well, as for the amenities - a sewer was made. A well-septic tank was dug and sewerage was laid. Now, in a two-story frame house 6 x 8, a bath, a toilet, a shower room and other signs of civilization take place and can function in full.

My mistakes and conclusions after the construction of a frame house 6x8

The experience gained shows that 6 x 8 on a turnkey basis is quite realistic on its own. Hired workers were involved in the foundation, stove, and ventilation. Digging a well does not count, since this is more of an improvement and has an indirect relationship to construction.

Looking back, I want to draw several important conclusions:

Summing up, we can say that it is quite possible to make a dream a reality. And the independent realization of a dream reduces the price of a 6 x 8 frame house by one and a half to two times, which means it makes the dream even more attractive and achievable.

The technology that allows building 6x6 frame houses appeared in our country more than 30 years ago. But it was not popular due to the frequent non-compliance with the rules of construction and the fragility of the building. Now you can create objects that are superior in reliability to early buildings. Our specialists have practiced abroad and apply all the experience in practice. We work on a turnkey basis, creating buildings from scratch. We will do projects, orientation, installation and design in a couple of months. Our housing constructions are of good quality.

The layout is calculated based on the size. You can make bedrooms, a living room, a hall, a bathroom, a kitchen-dining room, an attic and a terrace near the house. The idea of the client is transferred to the drawing, agreed upon and after that becomes the basis for future construction.

Prices for frame houses 6x6

All masters set a price tag based on the cost of the forest. We have verified suppliers. We have been working with them for over 10 years. They bring winter forest to our shop. It works better and is of good quality.

Advantages of the Canadian-Finnish technology:

not high cost of the object;
accelerated construction;
performance of work in all weather conditions;
the microclimate is created favorable;
soundproofing is good;
laying pipes inside the walls;
no shrinkage;
low foundation;
light finish.

Photos of our work are on the Internet. We have posted them for your convenience. Take a look at them. Choose and contact us. We will recreate the object on your site.

Frame houses have long occupied their specific niche in housing construction. At this point in time, more than half of all suburban households are environmentally friendly wooden buildings with a solid frame base.

Specialists involved in the design and subsequent construction of frame-panel residential buildings consider the construction of a private house with a garage the most optimal and cost-effective option.

Distinctive features of the attic

The arrangement of a sloping roof has long been a matter of great controversy, there are many supporters and opponents of the construction of the attic. Projects of frame houses with an attic are particularly economical, but at the same time there is a real chance of losing square meters, and there are always not enough of them.

In addition, the installation of double-glazed windows in the attic will cost much more. But all costs will pay off due to the fact that you do not need to purchase finishing material to decorate the facade of a residential building, a bathhouse with an attic. Additional costs will be required only for the construction of the truss system and the purchase of metal tiles.

Frame house 6x6 m with an attic

Projects stand out for their originality and attractiveness. Attic floor is a free field of activity for designers and decorators. In a room with an unusual architecture, even the bevels of the walls can be turned into a bright element of decor.

The versatility of attic spaces allows you to equip a bedroom, an office, a gym and even a bathroom on the upper floors.

Specifications

Owners of frame houses 6x9 m with an attic quite often face the problem of poor heat transfer of the erected structure. To cope with this trouble, which causes certain inconveniences, it is necessary, when drafting a frame house with a garage and an attic, to take care of installing high-quality insulation inside and outside the building.

During the arrangement of high-quality heat and waterproofing of a bath with an attic, you need to have a certain skill and clearly follow the established sequence of all construction work. The result of the mistakes made can be the formation of condensate and the appearance of mold and fungus in the future. In this case, it is better to pre-order projects of frame baths with an attic.

Advice! To significantly increase the heat resistance of a house with a garage and an attic, it is necessary to insulate and decorate the outer surfaces of the facade with attractive and durable finishing materials. It can be brick, natural stone or block house.

If the facade insulation was carried out efficiently and in a timely manner, then a 6x6 m frame house will heat up faster and cool down more slowly - maintaining a warm and cozy atmosphere in all rooms.

The need for drafting project documentation

A correctly drawn up project of a 6x8 m frame house with an attic is almost a 100% guarantee that all construction, installation and finishing works will go strictly according to the plan and in accordance with all regulatory documents.

During work, the architect makes the most accurate drawing of the location of all the internal rooms of the future building. Projects of frame houses 6x9 m with an attic contain approved norms and plans for arranging the foundation and erecting load-bearing structures, material consumption and all necessary engineering communications.

All finished projects of frame houses with an attic can be divided into separate groups according to the size of the area. This is a small country house with a square up to 80 square meters. m or a luxurious mansion with a total area of more than 300 sq.m. It is most convenient to draw up project documentation if there are certain width and length parameters in meters. This may be a frame house project 8x10 m with an attic.

Individual projects

At this point in time, a fairly large number of standard projects of residential and commercial buildings have been developed, there are projects of frame baths with an attic. However, some customers prefer to build a house with a unique and sometimes even original architecture.

It can be elegant mansions in the Gothic style, frame baths, or, conversely, ultra-modern buildings built using the latest developments and technologies. These include the built-in automatic system "Smart Home". In this case, the task of the designer becomes more complicated.

Creating a project of a frame house 8x10 m with an attic, the architects take into account all the wishes of the client: facade decoration, interior footage, insulation, waterproofing, arrangement of the heating and water supply system. If necessary, already at the initial stage of planning, interior designers are involved in the creation of the project. Such a tandem allows you to create the most accurate and correctly calculated plan.

The photo shows a project of a 6x8 m frame house with an attic.

The cost of a private house with a sloping roof

The final cost of the entire residential building is influenced by several factors:

type of foundation;
floor material;
roof structure;
facade decoration;
engineering structures;
installation of windows and doors;
interior decoration.

It is necessary to take into account all the costs associated with the construction. This may be the use of construction equipment and the wages of workers.

The most economical option is considered to be one-story buildings, and frame baths with an attic. Projects can be very diverse.

A fully equipped house is suitable not only for staying in it during the summer season, but also for permanent residence of a small family.

*-The indicated price includes materials, delivery within 400 km from our production and construction of a frame house by Russian carpenters.

Strapping - timber of natural humidity (spruce / pine AB) with a section of 150 * 100 mm. On the outer perimeter, the strapping is laid in two rows. The bar is treated with an antiseptic.
Floor logs - board of natural humidity (spruce / pine AB) with a section of 100x40 mm, with a step of 600 mm
Draft floor - a board of natural humidity (spruce / pine AB) with a section of 19/22 * 100 / 150mm. Vapor waterproofing - NANOIZOL S
Floor insulation - mineral wool KNAUF / URSA, 50 mm thick. Vapor barrier - NANOIZOL "V".
The finished floor of the first floor is a dry tongue-and-groove floorboard (pine B) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
External walls and pediments - a frame made of a bar (pine B) with a section of 40x75mm. Assembly on construction, black nails.
Insulation of walls and gables - ROCKWOOL basalt slabs, 50 mm thick. Vapor barrier - NANOIZOL V.
Internal wall cladding - lining (pine B) 12.5 * 88mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
Partitions - a frame made of a bar with a section of 40x50mm. Sheathing of partitions - lining (pine B) 12.5 * 88 mm, on racks.
The ceiling height of the first floor in cleanliness (from floor to ceiling) - 2.20m
Ceiling filing - lining (pine B) 12.5 * 88 mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
Floor insulation - mineral wool KNAUF / URSA, 50 mm thick. Vapor barrier - NANOIZOL V.
Attic floors - dry tongue-and-groove floorboard (pine B) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
Sheathing of the walls and ceiling of the attic - lining (pine B) 12.5 * 88mm. It is sewn along the rafters through the Nanoizol V membrane.
Insulation of the attic walls - ROCKWOOL basalt slabs, 50 mm thick. Vapor barrier - NANOIZOL V.
Attic partitions (if any) - a frame made of a bar with a section of 40x50mm. Sheathing of partitions - lining (pine B) 12.5 * 88 mm, on racks.
Rafters - farms from a bar of natural humidity (spruce / pine AB) with a section of 40 * 100 / 150 mm. The rafters are installed in increments of 900 mm.
Roof lathing - board of natural humidity (spruce / pine AB) 22/25 * 100 / 150mm. Counter-lattice - bar 20 * 40 mm.
Coating - profile sheets of galvanized steel. Underroofing vapor barrier - NANOIZOL S.
Roof eaves and overhangs 200 mm wide - hemmed with clapboard (pine B) 17 * 90 mm.
Stairs to the second floor (for houses with an attic) - on bowstrings made of planed timber, with steps made of floorboards.
Doors - wooden, paneled (pine B). Size 2000x800mm. Handles, hinges. Entrance door with a padlock.
Open terrace, porch (if provided by the project). Supports - planed timber (spruce / pine AB) with a section of 100 * 100 mm. Fencing - planed timber (spruce / pine AB) with a section of 40 * 100 mm in two belts. Floor - dry tongue-and-groove floorboard (pine B) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments. Ceiling - lining (pine B) 17 * 90 mm.
Sealing of corners, joints, junctions - plinth (pine B) 40/45mm.
Finishing of windows, doors - platband (pine B) on both sides.
Delivery up to 400 km from our base in Pestovo, Novgorod region + unloading of the house kit. (https://yandex.ru/maps/10920/pestovo/?ll=35.809228%2C58.596895&mode=search&oid=1081678118&ol=biz&z=17)

The foundation is columnar. 4 blocks 200x200x400 in a pedestal on a cement screed. Pedestals are installed on a compacted sand cushion. Sand (or PGS) is provided by the customer.
Waterproofing - roofing material in one layer.
Floor logs - a board of natural humidity (spruce / pine AB) with a section of 150x40 mm, with a step of 600 mm, treated with an antiseptic.
Draft floor - edged board of natural humidity (spruce / pine AB) with a section of 19/22 * 100 / 150mm, treated with an antiseptic. Vapor waterproofing - NANOIZOL S.
Floor insulation - min. cotton wool KNAUF/URSA 100 mm thick. Vapor barrier - NANOIZOL "V".
The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
External walls and pediments - a frame made of a natural moisture bar (spruce / pine AB) with a section of 40x100mm. The frame is treated with NEOMID fire-retardant compound.
External wall cladding, gables - OSB panels 9mm moisture resistant. Wind and moisture protection - NANOIZOL A.
Internal wall cladding - lining (spruce / pine AB) 12.5 * 88mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
Partitions - a frame made of a bar of natural moisture (spruce / pine AB) with a section of 40x75mm. The frame of the partitions is treated with the NEOMID fire-retardant compound.
Sheathing of partitions - lining (spruce / pine AB) 12.5 * 88 mm, on racks.
The ceiling height of the first floor in cleanliness (from floor to ceiling) - 2.30m
Ceiling filing - lining (spruce / pine AB) 12.5 * 88 mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
Second floor - attic (if provided by the project). Clear attic ceiling height (from floor to ceiling) - 2.20m
The height of the roof in the ridge is 1.50 m (for one-story projects).
Insulation-noise insulation of floors - min. cotton wool KNAUF/URSA, 100 mm thick. Vapor barrier - NANOIZOL V.
Attic floors - dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
Sheathing of the walls and ceiling of the attic - lining (spruce / pine AB) 12.5 * 88mm. It is sewn along the rafters through the Nanoizol V membrane.
Partitions of the attic (if any) - a frame made of a bar of natural humidity (spruce / pine AB) with a section of 40x75mm. The frame of the partitions is treated with the NEOMID fire-retardant compound.
Sheathing of partitions - lining (spruce / pine AB) with a section of 12.5 * 88 mm, on racks.
Rafters - farms from a board of natural humidity (spruce / pine AB) with a section of 40 * 100 / 150 mm. The rafters are installed in increments of 800 mm.
Roof lathing - board of natural humidity (spruce / pine AB) 22/25 * 100 / 150mm. Counter-lattice - bar 20 * 40 mm
All wooden roof elements are treated with NEOMID fire and bioprotective compound.
Coating - steel profile sheets with polymer coating. Colors to choose from: RAL3005 wine red; RAL6005 moss green; RAL8017 chocolate RAL7004 grey; RAL5005 "blue". Underroofing vapor barrier - NANOIZOL S.
Staircase to the second floor - on bowstrings of planed timber, with wide steps. Railings and fencing in the attic from a planed bar 40 * 100 mm.
Windows are wooden. Double glazing. Inward-opening doors. Screw hinges, twist locks. Dimensions (height*width): 1200*600/1000/1200/1500mm; 600*600 mm.
Interroom doors - wooden, paneled, polished (spruce/pine AB). Size 2000x800mm. Handles, hinges.
Entrance door - steel, insulated STANDARD.
Open terrace, porch (if provided by the project). Supports - planed timber (spruce / pine AB) with a section of 100 * 100 mm. Fencing - planed timber (spruce / pine AB) with a section of 40 * 100 mm filled with carved balusters. Floor - dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments. Ceiling - lining (spruce / pine AB) 17 * 90 mm.
Sealing of corners, joints, junctions - plinth (spruce / pine AB) 40/45mm.
Finishing of windows, doors - platband (spruce / pine AB) on both sides.
Hardware: black building nails, galvanized building and finishing nails, self-tapping screws.
Delivery up to 400 km from our base + unloading of the house kit.
https://yandex.ru/maps/10920/pestovo/?ll=35.809228%2C58.596895&mode=routes&oid=1081678118&ol=biz&rtext=58.596895%2C35.809228&rtt=auto&z=17
Assembly of the house on the site of the customer.

The foundation is columnar. 4 blocks 200x200x400 in a pedestal on a cement screed. Pedestals are installed on a compacted sand cushion. Sand (or PGS) is provided by the customer.
Waterproofing - roofing material in one layer.
Strapping - timber of natural humidity (spruce / pine AB) with a section of 150 * 150 mm. On the outer perimeter, the strapping is laid in two rows. The bar is treated with a protective compound.
Zabirka - decorative finishing of a socle. A framework from a bar 40*100 mm with a crate from a board 22*100 mm. Flooring - profiled steel sheets with a polymer coating in the color of the roof. Ebb along the perimeter of the foundation from the upper edge of the strapping. Ventilation openings (vents).
Floor logs - chamber drying board (spruce / pine AB) with a section of 150x40 mm, with a step of 600 mm.
Draft floor - edged board of chamber drying (spruce / pine AB) with a section of 19/22 * 100 / 150mm. Vapor waterproofing - NANOIZOL S.
The strapping, logs and subfloor are treated with a protective indelible compound NEOMID.
Floor insulation - min. cotton wool Knauf, 150 mm thick. Vapor barrier - NANOIZOL "V".
The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce/pine A) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
External walls and pediments - a frame made of chamber-drying timber (spruce / pine AB) with a section of 40x100mm. Assembly on nails using galvanized steel perforated fasteners.
External wall cladding, gables - OSB panels 9mm moisture resistant. Wind-moisture protection - NANOIZOL A. Panel joints are closed with planks.
Insulation of walls and gables - ROCKWOOL basalt slabs, 100 mm thick. Vapor barrier - NANOIZOL V.
Internal wall cladding - lining (spruce / pine A) 12.5 * 88mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
Partitions - a framework from a bar of chamber drying (spruce/pine AB) with a section of 40х100 mm. Thermal insulation-noise insulation of partitions - ROCKWOOL basalt slabs 100 mm thick.
Sheathing of partitions - lining (spruce / pine AV) 12.5 * 88 mm, along the racks through the NANOIZOL V membrane.
The ceiling height of the first floor in cleanliness (from floor to ceiling) - 2.40m
Ceiling filing - lining (spruce / pine A) 12.5 * 88 mm. Counter rail - 10*30 mm. Ventilation gap - 10 mm.
Second floor - attic (if provided by the project). Clear attic ceiling height (from floor to ceiling) - 2.25m
The height of the roof in the ridge is 1.50 m (for one-story projects).
Floor insulation - min. cotton wool Knauf, 100 mm thick. Vapor barrier - NANOIZOL V.
Attic floors - dry grooved floorboard (spruce / pine A) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
Sheathing of the walls and ceiling of the attic - lining (spruce / pine A) 12.5 * 88mm. It is sewn along the rafters through the NANOIZOL V membrane.
Attic ceiling insulation - min. cotton wool Knauf, 100 mm thick. Vapor barrier - NANOIZOL V
Attic wall insulation - ROCKWOOL basalt slabs, 100 mm thick. Vapor barrier - NANOIZOL V.
Partitions of the attic (if provided for by the project) - a frame made of chamber-drying timber (spruce / pine AB) with a section of 40x100mm. Thermal insulation-noise insulation of partitions - ROCKWOOL basalt slabs 100 mm thick.
Sheathing of partitions - lining (spruce / pine A) 12.5 * 88 mm, along the racks through the NANOIZOL B membrane.
Rafters - farms from chamber drying boards (spruce / pine AB) with a section of 40 * 100 / 150 mm. The rafters are installed in increments of 600 mm.
Roof lathing - chamber drying board (spruce/pine AB) 22/25*100/150mm. Counter-lattice - bar 20 * 40 mm.
Covering - a metal tile. Colors to choose from: RAL3005 wine red; RAL6005 moss green; RAL8017 "chocolate"; RAL7004 "grey"; RAL5005 "blue". Underroofing vapor barrier - NANOIZOL S.
Installation of a drainage system from the roof (PVC Döcke).
Cornices and roof overhangs 300 mm wide - hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
Stairs to the second floor (for houses with an attic) - on bowstrings made of glued laminated timber, with wide steps. Turned poles and balusters. Figured handrail and fence in the attic.
Windows - PVC, white with single-chamber double-glazed windows. Dimensions (height*width): 1200*600/1000/1200/1500mm; 600*600 mm.
Interroom doors - wooden, paneled, polished (spruce/pine A). Size 2000x800mm. Handles, hinges.
Windows and doors are installed in mounting boxes. Technological gaps are filled with mounting foam.
Entrance door - steel, insulated, PRESTIGE. Size 2050*870 mm.
Open terrace, porch (if provided by the project). Supports - planed timber of chamber drying (spruce / pine AB) with a section of 100 * 100 mm. Fencing - chamber-drying planed lumber (spruce / pine AB) with a section of 40 * 100 mm filled with carved balusters. Floor - dry tongue-and-groove floorboard (spruce/pine A) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments. Ceiling - lining (spruce / pine A) 17 * 90 mm.
The entire building is treated from the outside and from the inside with the NEOMID fire-retardant composition. Including: external walls and gables, internal walls, floors, ceilings, hidden elements of the load-bearing structure of the roof (rafters, lathing, counter lathing).
Sealing of corners, joints, junctions - plinth (spruce / pine A) 40/45mm.
Finishing of windows, doors - platband (spruce/pine A) on both sides.
Hardware: black building nails, galvanized construction and finishing nails, self-tapping screws, perforated galvanized fasteners.
Delivery up to 400 km from our base in Pestovo, Novgorod region + unloading of the house kit. https://yandex.ru/maps/10920/pestovo/?ll=35.809228%2C58.596895&mode=routes&oid=1081678118&ol=biz&rtext="&rtt=auto&"amp;z=17
Assembly of the house on the site of the customer.

Constructive	ECONOMY	STANDARD	PRESTIGE
Column Foundation
Double strapping from a bar 150 * 100 mm
Double strapping from a bar 150 * 150 mm
Closed plinth (pickup)
floor joists
Floor insulation	Knauf 50 mm	Knauf 100 mm	Knauf 100 mm
Wall insulation	Knauf 50 mm	ROCKWOOL 100 mm	ROCKWOOL 100 mm
Ceiling height of the first floor
Finished floor sheet pile 36 mm		spruce/pine AB	spruce/pine A
wall frame	bar 40*75 mm	bar 40*100 mm	bar 40*100 mm
Partition frame	bar 40*50 mm	bar 40*75 mm	bar 40*100 mm
Sound insulation of partitions			ROCKWOOL 100 mm
Frame assembly			Nails + screws + perforation
Interior trim eurolining 12.5*88 mm		spruce/pine AB	spruce/pine A
Exterior finish			OSB + planks
Staircase made of planed timber without balusters and railings
Staircase made of planed timber without balusters, with railings and railings in the attic
Staircase made of glued laminated timber with turned pillars and balusters, figured handrail and railing in the attic
Windows without mounting boxes, with extensions
Windows in mounting boxes, with sealant
PVC windows with double glazing
Paneled interior doors		spruce/pine AB	spruce/pine A
Paneled front door
Entrance door steel, insulated STANDARD
Entrance door steel, insulated PRESTIGE
Kiln-dried lumber kit
rafters
Rafter pitch, mm
	galvanized corrugated board	profiled polymer	metal tile
drainage system
Protective treatment		strapping, logs, subfloor, frame	all wooden surfaces (including hidden ones)
Skirting boards, platbands	pine B learn more)	450	running meters
Double strapping from timber 150x150mm	200	running meters
Double strapping from timber 150x200mm	250	running meters
Device floor log from a bar 150x100mm	150	running meters
The device of floors from a terrace board of a larch "velveteen" (for open terraces) ()	2000	m*2 floor
Installation of finishing floors from a tongue-and-groove larch floorboard 27 mm ()	2000	m*2 floor
Insulation of 150 mm (ceilings, walls, gables, attic)	2000	m*2 total area
Insulation of 200 mm (ceilings, walls, gables, attic)	3000	m*2 total area
Warming SHELTER (HOLOFIBER)	from 2000	m * 2 insulated area
Ceiling height increase by 10 cm	300/500/700	running meters exterior walls and partitions
The device of a ladder on a bowstring made of glued laminated timber, with wide steps, turned pillars, balusters and a figured handrail.	25000	PCS.
Roofing - metal tiles. (RAL 3005,5005,6005,7004, 7024,8017)	500	m*2 roof
Roofing - corrugated board with a polymer coating. (RAL 3005,5005,6005,7004, 7024,8017)	300	m*2 roof
Installation of a drainage system (PVC, DEKE)	1200	running meters roof slope
Corner snow barrier device ()	600	running meters roof slope
The device of tubular snow barriers ()	1300	running meters roof slope
Attic device: sparse flooring from edged boards along the ceiling beams, a door in one of the gables + a dormer window in the opposite gable	500	m*2 ceiling
Exterior finish - block house spruce / pine AB 28 * 140 (over OSB)	1200	m*2 area
Exterior finish - imitation of timber 18 * 140 mm (over OSB)	900	m*2 area
Interior decoration - block house spruce / pine AB 28 * 140 (instead of lining)	600	M*2 square
Interior decoration - imitation of spruce / pine timber AB 18 * 140 (instead of lining)	400	M*2 square
Treatment of the entire building with a fire-retardant compound NEOMID ()	200	m*2 cultivated area
Surface treatment with NEOMID terrace oil ()	200	m*2 floor
Wall and ceiling decoration with larch clapboard 14 * 90mm ()	1500	m * 2 walls and ceiling
Installation of a Russian-made insulated steel door ()	from 12000	PCS.
Installation of PVC windows with single-chamber double-glazed windows	from 4000	PCS.
Installation of PVC windows with double-glazed windows	from 5000	PCS.
Delivery over 400 km from Pestovo, Novgorod region.	100	km
Construction change house (including its delivery and installation)	from 21000	PCS.