One-story house made of timber 6x6 projects. One-storey Sort: ascending by price. The price of a house from a bar for shrinkage
- The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks each in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
- An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm. Steps at the entrance.
- The height of the ceiling of the first floor in cleanliness (from the floor log to the floor beam) - 2.29m (+/- 50mm)
- The second floor is an attic. Clear attic ceiling height (from floor beam to ceiling beam) - 2.25 m
- The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for buildings with an attic).
- In the pediments of one-story buildings, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
- Ventilation hatches are installed in the gables of buildings with an attic (3 pieces for each gable).
- Eaves and roof overhangs 200 mm wide (for one-story buildings) and 300 mm (for buildings with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
- The device of window and door openings with a dressing crown, without the installation of casing bars.
- Loading, delivery up to 400 km from the city of Pestovo, Novgorod region, unloading of a set of material.
- Assembly of the house / bath at the customer's site.
- The foundation is columnar. 2 blocks in a pedestal (for one-story houses) and 4 blocks in a pedestal on a cement screed (for houses with an attic). Concrete blocks, full-bodied, 200x200x400 mm in size. Pedestals are installed on a compacted sand cushion. Sand (PGS) is provided by the customer.
- Waterproofing - roofing material in one layer.
- Strapping - a bar of natural moisture with a section of 150x100 mm. On the outer perimeter, the strapping is laid in two rows. The bar is treated with a protective composition.
- Floor logs - a board of natural moisture with a section of 40x150 mm per edge, with a step of 600 mm.
- Draft floor - a board of natural humidity with a section of 22x100mm. Steam, waterproofing - NANOIZOL S.
- Floor insulation - 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier - NANOIZOL V.
- The finished floor of the first floor is a dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. Each fifth board is fastened with screws (for the possibility of further flooring).
- External walls - profiled beam of natural humidity with a section of 145x90 mm (wall thickness - 90mm) Profile "block house" or straight. There are 17 crowns in total.
- Partitions of the first floor - profiled beam of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
- Mezhventsovy insulation - jute cloth 6 mm thick
- Interconnection - on a metal dowel (building nail 6x200mm, 250mm).
- Corner connection - "in half a tree." The outer corners of the log house are sewn up with clapboard (spruce / pine AB) 17 * 90 mm in two rows.
- An open terrace (if any) on supports made of planed timber with a section of 100 * 150 mm, with shrink jacks. Fencing - a handrail from a planed bar with a section of 40 * 100 mm filled with carved balusters. Steps at the entrance.
- Terrace floors - dry tongue-and-groove floorboard (spruce/pine AB) 36mm thick. Fasten with self-tapping screws to each board. Boards are laid in 5 mm increments.
- Terrace ceilings - lining (spruce / pine AB) 17 * 90 mm. Vapor barrier - NANOIZOL V.
- Clear ceiling height of the first floor (floor to ceiling) – 2.25m (+/- 50mm)
- The filing of the ceiling of the first floor - lining (spruce / pine AB) 12.8 * 88 mm. (joint for layout is allowed)
- The second floor is an attic. Clear attic ceiling height (from floor to ceiling) - 2.20 m
- The height of the roof in the ridge is 1.50 m (for one-story projects).
- Floor insulation - 100 mm KNAUF / URSA mineral wool (or equivalent). Vapor barrier NANOIZOL V.
- Attic floors - dry tongue-and-groove floorboard (spruce / pine AB) 36mm thick. . Each fifth board is fastened with screws (for the possibility of further flooring).
- Sheathing of the walls and ceiling of the attic - lining (spruce / pine AB) 12.5 * 88 mm (a joint for layout is allowed).
- Attic wall insulation - 100mm ROCKWOOL basalt mats (or equivalent). Vapor barrier - NANOIZOL V.
- Partitions of the attic - a frame made of a bar 40x75, sheathed on both sides with clapboard (spruce / pine AB) 12.5 * 88 mm. Partitions are not insulated.
- Rafters - farms from a board of natural humidity with a section of 150x40mm., 100x40mm. Are established with a step of 900-1000 mm.
- The pediments are a frame made of boards of natural humidity with a section of 150 * 40 mm, 100 * 40 mm. External finishing of pediments - lining (spruce / pine AB) 17 * 90 mm. Wind protection - NANOIZOL "A" (for houses with an attic).
- In the pediments of one-story houses, a door (1 pc.) And ventilation hatches (1 pc. For each pediment, under the ridge) are installed.
- Ventilation hatches are installed in the gables of houses with an attic (3 pieces for each gable).
- Lathing - a board of natural moisture with a section of 22 * 100 mm, with a step of 300 mm. Counter-lattice - rail 20 * 40 mm, along the slopes of the rafters.
- Roofing - ONDULIN (burgundy, brown, green) or galvanized corrugated board. Underroofing vapor barrier - NANOIZOL S.
- Installation of a drainage system from the roof (PVC, DEKE). Colors - brown (chocolate), burgundy (garnet), white (ice cream).
- Cornices and roof overhangs 200 mm wide (for one-story houses) and 300 mm (for houses with an attic). Cornices and overhangs are hemmed with clapboard (spruce / pine AB) 17 * 90 mm.
- The staircase to the attic is single-flight, on bowstrings made of planed timber with a section of 145 * 90 mm. Floorboard steps. The handrail and the fence in the attic are a planed bar with a section of 40 * 100 mm.
- Windows - wooden, double glazing, with a seal and fittings (screw hinges, twist locks). Inward-opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600mm; 600*600 mm. Windows are installed in casing boxes.
- Doors - wooden, paneled, deaf (spruce / pine A). Size (h*w) 2000*800 mm; 2000*700 mm. Handles, hinges. A padlock is installed on the front door.
- Casing bars (swarms) are installed in window and door openings.
- Sealing of corners, joints, junctions - plinth spruce / pine A.
- Finishing of windows, doors - platband spruce / pine A on both sides.
- Nails for fixing parts - construction black.
- Nails for fastening lining - galvanized 2.5x50 mm
- Nails for fastening the plinth, layouts - finishing galvanized 1.8x50 mm.
- Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
- Assembly of the house on the site of the customer.
We have compiled for you a convenient table of differences in the configuration of houses for shrinkage and turnkey.
COSTRUCTION |
SHRINK |
FULL CONSTRUCTION |
Columnar foundation of concrete blocks 200*200*400 |
Yes |
Yes |
Double strapping from a bar 150 * 100 mm |
Yes |
Yes |
Floor logs from a board 40 * 150 on the edge with a step of 600 mm |
Yes |
Yes |
Draft floor from a board 22*100/150 mm |
No |
Yes |
Floor insulation with hydro and vapor barrier |
No |
Yes |
Finished floor - dry tongue-and-groove floorboard 36 mm |
No |
Yes |
Walls and partitions made of profiled timber of natural humidity with a section of 145 * 90 mm (wall thickness - 90 mm) |
Yes |
Yes |
assembling a log house on steel dowels |
Yes |
Yes |
Corner connection - in half a tree |
Yes |
Yes |
Mezhventsovy heater - jute |
Yes |
Yes |
Rafters - trusses from a bar 40 * 100/150 mm with a pitch of 900/1000 mm |
Yes |
Yes |
Lathing - board 20*100/150 mm |
Yes |
Yes |
Roofing - ondulin / galvanized corrugated board C20 |
Yes |
Yes |
Roof eaves and overhangs are hemmed with clapboard spruce / pine AB |
Yes |
Yes |
Installation of a drainage system from a PVC roof, DEKE |
No |
Yes |
Window and door openings with dressing crown, without installation of casing bars |
Yes |
No |
Window and door openings with installation of casing bars |
No |
Yes |
Installation of windows and doors |
No |
Yes |
Ceiling filing - lining spruce / pine AB |
No |
Yes |
Insulation + vapor barrier of floors / attic |
No |
Yes |
Finishing the walls and ceiling of the attic - lining spruce / pine AB |
No |
Yes |
Staircase to the attic |
No |
Yes |
Finishing: plinth, platbands |
No |
Yes |
Loading a set of material, its delivery up to 400 km from our base, unloading at the customer's site |
Yes |
Yes |
Name |
Cost, rub) |
unit of measurement |
Foundation installation on screw piles or reinforced concrete foundation |
8-921-930-69-80, |
|
Decorative finish of the plinth - pickup () |
||
Installation of reinforced concrete slabs 500 * 500 * 100 mm under the supporting pedestals () |
||
Protection (lining board) of the first row of strapping from a larch board 50 * 150 mm () |
||
Protection (lining board) of the first row of strapping from a larch board 50 * 200 mm () |
||
Double strapping from timber 150x150mm |
||
Double strapping from timber 150x200mm |
||
Device floor log from a bar 150x100mm |
||
Installation of floors from a larch terrace board "velveteen" (for open terraces) () |
||
The device of finishing floors from a tongue-and-groove larch floorboard 27 mm () |
||
External walls made of profiled timber with a cross section of 145x140mm, partitions made of profiled timber. humidity section 145*90 mm |
running meters external walls of the log house |
|
External walls and partitions made of profiled chamber-drying timber with a section of 145x90 mm |
running meters exterior walls and partition walls |
|
External walls made of profiled kiln-dried timber with a section of 145x140 mm, partitions made of profiled kiln-dried timber with a section of 145x90 mm |
linear meters of the outer walls of the log house |
|
Exterior walls made of profiled timber. humidity with a section of 145x190mm, partitions made of profiled timber eat. humidity section 145*90 mm |
linear meters of the outer walls of the log house |
|
External walls made of profiled chamber-drying timber with a section of 145x190mm, partitions made of profiled chamber-drying timber with a section of 145*90mm. |
linear meters of the outer walls of the log house |
|
Kiln-dried lumber kit () |
m * 2 building area |
|
Conjugation of crowns on a wooden dowel |
||
Assembling a log house using a SPRING ASSEMBLY FORCE () |
running meters external walls and partition walls |
|
Assembling a log house with a screed of crowns in height with steel studs |
1500 |
running meters external walls and partition walls |
Corner connection "groove-thorn" (warm corner) |
one corner of the log |
|
Corner connection “into a bowl” () |
house kit |
|
Interventional insulation - holofiber () |
linear meter of the outer walls of the log house |
|
Increasing the ceiling height by 14 cm (+ one crown in the log house) |
running meters exterior walls and partition walls |
|
Insulation 150mm |
m * 2 insulated area |
|
The device of a ladder on a bowstring made of glued laminated timber, with wide steps, turned pillars, balusters and a figured handrail. |
||
Roofing - metal tiles |
m*2 roof |
|
Roofing - polymer-coated corrugated board (RAL 3005,5005,6005,7004, 7024,8017) |
m*2 roof |
|
Installation of a drainage system (PVC, DEKE) |
running meters roof slope |
|
Corner snow barrier device () |
running meters roof slope |
|
The device of tubular snow barriers () |
running meters roof slope |
|
External finishing of pediments - block house spruce / pine AB 28 * 140 |
m * 2 gable area |
|
External finishing of gables - imitation of timber 18*140 mm |
m * 2 gable area |
|
Attic device: sparse flooring from edged boards along the ceiling beams, a door in one of the gables + a dormer window in the opposite gable |
m*2 ceiling |
|
Treatment of the entire building with a fire-retardant compound NEOMID () |
m * 2 building area |
|
Surface treatment with NEOMID terrace oil () |
||
Processing the walls and ceiling of the steam room and washing varnish NEOMID "for baths and saunas" () |
m * 2 walls and ceiling |
|
Processing the ends of the log house with NEOMID TOR PLUS () |
opening/corner |
|
Installation of a Russian-made insulated steel door () |
||
Installation of PVC windows with single-chamber double-glazed windows |
||
Installation of PVC windows with double-glazed windows |
||
Delivery over 400 km from Pestovo, Novgorod region. |
||
Construction change house 2.0 * 3.0 / 4.0 m () |
from 21 000 |
PCS. |
Private housing construction is superior in number to multi-storey construction. Often chooses houses from a bar 6 by 6. This is due to the desire to live in environmentally friendly conditions. Therefore, more often land owners choose cleaner building materials. This includes profiled timber. It is made from solid wood. Coniferous species are selected - pine, spruce, larch, cedar. Each of them has its own characteristics. The type of wood you choose depends on the climate. The structures are distinguished by good energy properties and are able to keep the temperature, so it is comfortable in them in winter. The heat stays for a long time. Glued material is worse in quality and inferior to whole-cut raw materials. It does not meet customer requirements.
House layout 6x6
Projects with such dimensions are popular, the parameters are average. In this embodiment, it is easy to provide several rooms and utility rooms. You can organize a terrace near the object, creating additional space for relaxation.
The comfort of the owners depends on the planning of the internal space. Our company designs a usable area. Our solutions include the required household pantries, boiler rooms (if necessary) and rooms for receiving guests. We manufacture turnkey buildings:
- interior and exterior finishing,
- piping, sewerage, electricity and heating,
- installation of plumbing equipment,
- purchase of furniture.
You can choose the roof of your choice. Prices for a one-story building 6x6 are democratic.
Our masters will come to the place and, having decided on the dimensions, will calculate the amount. The estimate will be in the hands of the customer quickly.
Call us at the office. We will answer your questions. Check out the gallery for a quote. Here is the approximate cost of each option.
In the ASK Stroitel company you can buy a prefabricated house at an affordable price for you. Our qualified specialists will deliver and assemble a turnkey prefabricated wooden house on time, including all current work.
In our catalog you will find various projects for the construction of country single-storey prefabricated panel and frame houses with dimensions and descriptions, as well as with the ability to make your desired individual adjustments. Contact our manager and order a turnkey prefabricated wooden house according to an individual project and any architectural complexity.
Thanks to the many years of experience of ASK Stroitel, one-story country houses made of wood and various types of structures, we will design the house of your dreams, making it only from high-quality, reliable and durable materials!
Now it has become easy to buy a modern one-story prefabricated panel or frame country house with all amenities. At the same time, prices for such houses have now become the most attractive.
Of course, if you are interested in various designs of a frame or prefabricated panel type, for example, for the construction of different houses in summer cottages, then you must first study the price offers and technical parameters, only then make your choice. Indeed, only an experienced specialist who is engaged in the construction of modern country houses will be able to offer the most successful solution, both in terms of the price component and in terms of technical parameters.
It is worth knowing that now it has become extremely simple to buy a modern one-story country house, for example - a frame-, prefabricated, or just a panel structure. You just need to choose a suitable house and order its construction in a turnkey company that deals professionally with country houses. At the same time, there is no doubt that the panel or frame structure of such a country house will last a long time and will constantly delight with its quality and magnificence.
You should know that the design of a modern house, for example, with panel or frame structures, can be developed individually. Now houses with individual design are not uncommon. These prefabricated houses look great. Choosing such houses for yourself, you can be sure that they will be a great way to express your individuality and creativity. Experienced designers will be able to work with panel, prefabricated or frame structures in order to satisfy all the wishes of the client. It is important to know that houses with panel, frame or prefabricated structures are now the most in demand. Many people have managed to appreciate all the advantages of prefabricated, frame-, shield-oriented structures (houses) in practice.
You should know that for the construction of a one-story turnkey house these days, for example, with panel parts, it will not take much time. Undoubtedly, a modern frame country house with panel parts should be built by experienced installers. Only experienced installers will be able to do all the right operations with panel elements, and build a beautiful and high-quality house. Thanks to the development of modern technologies, modern houses of this type are the best solution for recreation and entertainment, so many are now building such houses for themselves. Do not miss a real opportunity to get a good house outside the city. You just need to choose an individual design and type of such a house and order its construction from experienced professionals. Most people spend only the warm season in the country. Therefore, they usually try to build one-story country houses cheaper. But still, we all want to have a warm and comfortable home, and built cheap prefabricated turnkey country houses are quite comfortable.
Technology to build frame houses 6 by 6 appeared in our country more than 30 years ago. But it was not popular due to the frequent non-compliance with the rules of construction and the fragility of the building. Now you can create objects that are superior in reliability to early buildings. Our specialists have practiced abroad and apply all the experience in practice. We work on a turnkey basis, creating buildings from scratch. We will do projects, orientation, installation and design in a couple of months. Our housing constructions are of good quality.
The layout is calculated based on the size. You can make bedrooms, a living room, a hall, a bathroom, a kitchen-dining room, an attic and a terrace near the house. The idea of the client is transferred to the drawing, agreed upon and after that becomes the basis for future construction.
Prices for frame houses 6x6
All masters set a price tag based on the cost of the forest. We have verified suppliers. We have been working with them for over 10 years. They bring winter forest to our workshop. It works better and is of good quality.
Advantages of the Canadian-Finnish technology:
- not high cost of the object;
- accelerated construction;
- performance of work in all weather conditions;
- the microclimate is created favorable;
- soundproofing is good;
- laying pipes inside the walls;
- no shrinkage;
- low foundation;
- light finish.
Photos of our work are on the Internet. We have posted them for your convenience. Take a look at them. Choose and contact us. We will recreate the object on your site.